硅橡胶微球光扩散剂的制备表征及应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中国博士后科学基金(2014M551602);江苏省工业支撑(BE2014821);江苏省产学研前瞻项目(BY2015027-10, BY2015027-22);江苏省博士后基金资助(1401083B);常州市科技支撑计划(工业)(CE20150002);青蓝工程2016年度江苏高校“青蓝工程”资助;江苏省大学生创新创业(201610292036Y)


Preparation, Characterization and Application of Silicone Rubber Microsphere Light Scattering Agent
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过在硅橡胶加成聚合体系中引入稀释剂,利用悬浮聚合一步法制备硅橡胶微球。利用红外光谱、接触角、热重分析、扫描电子显微镜、雾度/透光率测试对硅橡胶微球及其聚甲基丙烯酸甲酯(PMMA)复合材料的结构及性能进行研究和表征。结果表明,硅橡胶微球具有与硅橡胶一样的耐热性,其粒径主要分布在1~4 μm之间,且硅橡胶微球表面具有粗糙结构。将硅橡胶微球加入到PMMA中,实验结果表明,硅橡胶微球用量为1%时,PMMA雾度从2.54%提升至92.34%,而透光率仅从90.40%降至84.47%。

    Abstract:

    In this paper, the silicone rubber microspheres were prepared by one-step suspension polymerization by introducing diluent into the silicone rubber addition polymerization system. The structure and properties of silicone rubber microspheres and PMMA composites were characterized by FT-IR, WCA, TGA, SEM and haze / transmittance measurements. The results show that silicone rubber microspheres have the same heat resistance as silicone rubber, and the size of the microspheres is mainly between 1~4 μm, while the surface of the silicone rubber microspheres is rough. The experiment results show that when the amount of the silicone rubber microspheres is 1%, the haze of PMMA is greatly improved from 2.54% to 92.34%, but the transmittance of PMMA is only slightly reduced from 90.40% to 84.47%.

    参考文献
    相似文献
    引证文献
引用本文

瞿 鹏, 郭惠铭, 梁 天, 林 兴, 钱咏祥, 魏安琪, 姜 彦, 张洪文.硅橡胶微球光扩散剂的制备表征及应用[J].高分子材料科学与工程,2018,34(1):143-147.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2018-01-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@163.net; gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司