相变导热贴的制备及热老化性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重大科技专项02专项(2014ZX02501009-005)


Preparation and Heat Aging Property of Phase Change Thermal Interface Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选择氧化铝粉作为导热剂、自制热熔胶为黏接剂制备相变导热贴。通过导热仪和热阻仪,分析不同基础树脂、增黏树脂及增塑剂对相变导热贴热老化后的导热性能的影响。结果表明,当基础树脂为EVA、增黏树脂为石油树脂(5380)、增塑剂为季戊四醇油酸酯(PETO)时,相变导热贴具有良好的导热性能和耐热老化性能,导热率为4.1 W/(m·K),热阻抗为0.09 ℃·cm2/W,125 ℃老化480 h后,热阻抗轻微上升25%,综合性能良好。

    Abstract:

    Phase change thermal interface materials were prepared with aluminum oxide (as thermal conductive agent) and hot melt adhesive (as binding agent). The effects of different resins, tackifying resin and plasticizers on the thermal properties after heat aging were studied by thermal conductivity meter and thermal resistance meter. A better formula is as following: EVA, petroleum resin (5380) and pentaerythrite oleate (PETO). In this formula, the phase change thermal interface material has good thermal and anti-aging properties. Thermal conductivity is 4.1W/(m·K) and thermal resistance is 0.09 ℃·cm2/W. Moreover, after 480 h aging at 125 ℃, the increase rate of thermal resistance is as low as 25%.

    参考文献
    相似文献
    引证文献
引用本文

万炜涛,邹海仲,陈田安,王红玉.相变导热贴的制备及热老化性能[J].高分子材料科学与工程,2020,36(4):161-166.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2020-06-05
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@163.net; gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司