不同取代度氯甲基化聚醚酰亚胺的可控合成
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.7

基金项目:

国家杰出青年基金资助项目(21125628);国家自然科学基金资助项目(20976027)


Synthesis of Chloromethylated Poly(Ether-Imide) with Different Substitution Degrees
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用无毒高活性的氯甲基辛基醚(CMOE)作为氯甲基化试剂,对聚醚酰亚胺(PEI)进行氯甲基化。考察了各种因素对氯甲基化反应的影响规律,优化了反应条件。溶剂用量、催化剂用量、反应温度等因素对反应有显著影响,最佳反应条件为:PEI∶CMOE∶C2H4Cl2∶ZnCl2=2.0 g∶4 mL∶50 mL∶1.0 g,反应温度60℃。在该条件下控制反应时间,成功合成了一系列不同取代度的氯甲基化PEI,取代度为21%~110%。

    Abstract:

    The chloromethylation of poly(ether-imide)(PEI) was carried out by using non-toxic and high-efficient chloromethyl octyl ether(CMOE) as chloromethylation reagent.The effects of various factors on the chloromethylation reaction were studied,and the reaction conditions were optimized.The amount of solvent and catalyst,and the reaction temperature affected the chloromethylation of PEI significantly.The optimized condition is: PEI∶CMOE∶C2H4Cl2∶ZnCl2=2.0 g∶4 mL∶50 mL∶1.0 g at 60 ℃.Under optimum condition,a series of chloromethylated PEI with different substitution degrees ranging from 21% to 110% were prepared successfully by controlling the reaction time.

    参考文献
    相似文献
    引证文献
引用本文

王永东,焉晓明,贺高红,胡正文,吴雪梅,杜林.不同取代度氯甲基化聚醚酰亚胺的可控合成[J].高分子材料科学与工程,2012,28(10):1-3.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@163.net; gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司