相容剂甲基丙烯酸缩水甘油酯对尼龙6/SEBS-g-MA/蒙脱土复合材料的性能影响及机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB332

基金项目:


Effect of Compatibizer Glycidul Methacrylate on the PA6/SEBS-g-MA/OMMT Nanocomposites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以马来酸酐接枝SEBS(SEBS-g-MA)和有机蒙脱土(OMMT)分别作增韧剂和增强填料,甲基丙烯酸缩水甘油酯(GMA)为相容剂,采用熔融挤出方法制备了尼龙6/SEBS-g-MA/OMMT复合材料。通过扫描电镜(SEM)、力学性能测试、Molau实验及红外光谱(FT-IR)表征,考察了SEBS-g-MA、OMMT和GMA对复合材料的相形态和力学性能的影响。结果表明,OMMT能弱化PA6和SEBS-g-MA之间的相互作用力,导致橡胶相粒径增大,冲击强度降低。而GMA的使用,使PA6、SEBS-g-MA和GMA间形成化学反应,提高PA6和SEBS-g-MA之间的相容性,改善SEBS-g-MA的分散质量,减小分散相颗粒尺寸,进一步提高共混物的冲击强度。GMA存在时制备的复合材料可以获得具有良好平衡的综合力学性能。

    Abstract:

    Polyamide 6(PA6)-based composites were prepared using a melt-mixing technique.One maleated styrene-ethylene/butadiene-styrene copolymers(SEBS-g-MA) and one commercial organic montmorillonite(OMMT) served as the toughener and reinforcing filler,respectively.Glycidyl methacrylate(GMA) was used as a compatibilizer.The influences of SEBS-g-MA,OMMT and GMA on interfacial adhesion and mechanical properties of PA6 composites were investigated in terms of scanning electron microscope(SEM) observations,mechanical testing,Molau tests,infrared spectrum(IR) analyses.The results show that OMMT can weaken the interfacial interactions between PA6 and SEBS-g-MA,resulting in the increase of rubber particle size.Besides,the use of GMA improves the compatibility between PA6 and SEBS-g-MA,leading to further reduction of the sizes of SEBS-g-MA in the matrix,and improves impact strength of the composites,this is due to the reactions between PA6,SEBS-g-MA,and GMA.Satisfactorily balanced mechanical properties of the composites could be achieved in the presence of GMA.

    参考文献
    相似文献
    引证文献
引用本文

吴唯,何三雄,浦伟光.相容剂甲基丙烯酸缩水甘油酯对尼龙6/SEBS-g-MA/蒙脱土复合材料的性能影响及机理[J].高分子材料科学与工程,2012,28(1):75-78.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@163.net; gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司