PEG大分子硅氧烷制备药物缓释杂化纳米纤维膜
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

R943

基金项目:

安徽省教育厅自然科学研究项目(2009AJZR0137);合肥工业大学创新基金(GDBJ2009-049)资助


Preparation of Hybrid Nanofiber Membrane via Siloxane Functionized PEG as Drug Release System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用Jones试剂对聚乙二醇(PEG)进行修饰并合成端基为-Si(OEt)3的PEG大分子硅氧烷,将其与TiO2溶胶进行共水解缩合,制得PEG/SiO2-TiO2杂化纺丝液。在杂化纺丝液中加入头孢唑啉钠,经静电纺丝法制备载药杂化纳米纤维膜。对杂化电纺纤维膜的结构与形态进行了表征,并研究了其药物释放性能。红外光谱(FT-IR)研究了PEG大分子硅氧烷合成机理和产物结构;扫描电镜(SEM)照片显示,纳米纤维的平均直径约为115 nm,载药纳米纤维平均直径约为130 nm;紫外可见光(UV-Vis)光谱分析表明,载药纤维的初期释放速度较快,随时间推移释放速率逐渐降低,具有良好的药物缓释性能。

    Abstract:

    Polyethylene glycol(PEG)was reacted with Jones reagent and siloxane functionized PEG was prepared,PEG/SiO2-TiO2 hybrid sol was prepared by the hydrolysis and co-condensation of siloxane functionized PEG with TiO2 sol.Using cefazolin sodium as encapsulated drug,hybrid drug-loaded nanofiber membrane was prepared via electrospinning method.The morphology,chemical structure and drug release capability of the hybrid membrane were studied.The reaction mechanism was investigated via FT-IR spectra.SEM images showed that diameter of the hybrid nanofiber was about 115 nm,while that of the drug loaded nanofiber was about 130 nm.UV-Vis analysis showed that the drug release rate of drug-loaded fiber was high at an initial stage,and the rate decreased gradually with time prolonging,the hybrid membrane showed well performance of drug release.

    参考文献
    相似文献
    引证文献
引用本文

宋秋生,许顺,马海红,张恺,朱小飞. PEG大分子硅氧烷制备药物缓释杂化纳米纤维膜[J].高分子材料科学与工程,2012,28(9):158-161.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@163.net; gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司