温敏型羟丙基甲基纤维素/壳聚糖多孔复合膜的制备及表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目( 51263020, 51003090)


Preparation and Characterization of Temperature- Sensitive Hydroxypropyl Methylcellulose/Chitosan Blended Membrane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在超临界二氧化碳(sc CO2)条件下合成温敏聚合物聚(乙烯基己内酰胺-co-甲基丙烯酸) P(VCL-co-MAA),再通过溶液共混法制备不同质量比的P(VCL-co-MAA)-壳聚糖(CS)-羟丙基甲基纤维素(HPMC)多孔复合膜。采用红外(IR)、X射线衍射(XRD)、扫描电镜(SEM)对其进行结构表征,结果表明,HPMC 和 CS 在晶区有一定的相互作用,共混膜的结晶度减小;温敏聚合物P(VCL-co-MAA)和成膜聚合物间具有较好的相容性;复合膜的孔结构分布均匀。对复合膜的力学性能、吸水溶胀性能及水通量的测试结果表明,随着HPMC的含量增加,聚合物膜的拉伸断裂强度、断裂伸长率和弹性模量的变化趋势为先增大后减小。当CS与HPMC质量比为 3∶1 时,复合膜的拉伸强度为1.75MPa。所得复合膜的水通量随温度的上升而降低。

    Abstract:

    Temperature-sensitive polymer P(VCL-co-MAA) was synthesized in supercritical carbon dioxide. P(VCL-co-AA)/chitosan/ hydroxypropyl methylcellulose(P(VCL-co-MAA)/CS/HPMC) porous composite membranes with different ratio were prepared by solution blending method. The structure and properties of the membranes were characterized by IR, XRD, SEM. The results show that HPMC and CS in the crystalline region has a certain interaction, the crystallinity of blend membrane decreases. Temperature sensitive polymer P(VCL-co-MAA) and the film-forming biopolymer have a good compatibility, the pore structure of composite membrane is uniform. Water-absorbing swelling, water flux and mechanical properties of composite membrane were also evaluated. With the HPMC content increasing, the tensile strength, elongation at break and elastic modulus first increase and then decrease. When the mass ratio of CS and HPMC is 3∶1, the tensile strength of the composite membrane is 1.75MPa. The water flux of composite membrane decreases with the increase of temperature.

    参考文献
    相似文献
    引证文献
引用本文

侯敏娜, 马闯, 王吉德, 曹丽琴, 王刚.温敏型羟丙基甲基纤维素/壳聚糖多孔复合膜的制备及表征[J].高分子材料科学与工程,2013,29(11):109-113.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-11-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@163.net; gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司