有机玻璃热压弹性回复实验与建模
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

深港创新圈合作项目(2011139)


Hot Compression Elastic Recovery Experiments and Modeling for Polymethylmethacrylate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    首先通过热压缩实验研究热压工艺参数对有机玻璃(PMMA)热压后弹性回复的影响。从实验结果可知,温度和作用时间是影响热压后弹性回复率的重要因素。然后引入广义麦克斯韦方程作为热压应力松弛的控制方程,通过实验结果和模型计算结果对比,由该方程拟合的热压应力松弛曲线和实验测得的曲线具有较高的吻合度。最后由麦克斯韦方程导出弹性回复的数学模型,通过与实验结果对比可知,该数学模型对弹性回复的预测的误差小于10%。

    Abstract:

    Effects of process parameters on polymethylmethacrylate (PMMA) elastic recovery by hot compression experiments were researched. The results show that temperature and time are important factors to affect PMMA elastic recovery obtained from the experiments. Maxwell equation was generalized as the control equation of stress relaxation, and the fitting stress relaxation curves show high coincidence degree with the curves tested by experiments. The model of elastic recovery rate was derived from Maxwell equation, and the prediction error of the model to PMMA elastic recovery is less than 10%.

    参考文献
    相似文献
    引证文献
引用本文

王海雄, 吕永虎, 李积彬.有机玻璃热压弹性回复实验与建模[J].高分子材料科学与工程,2014,30(9):97-100.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-09-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@163.net; gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司