超高压水射流破碎轮胎橡胶的脱硫机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51175139);国家科技支撑计划(2011BAF11B06)


Desulfurization Mechanism of Tyre Rubber Under Ultra-High Water Jet Impact
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用超高压水射流装置将废旧子午线轮胎胎面胶破碎为橡胶粉末并进行橡胶回收,运用低场核磁共振、红外光谱、扫描电镜、粒度分析等手段对橡胶粉末的物理和化学结构进行表征。结果表明,橡胶材料在破碎过程中发生了常温脱硫反应,脱硫效果随着水射流压力的提高呈先升高后降低的趋势,并在200 MPa压力处达到最佳,材料内部交联信号强度下降到54.85%。根据红外光谱推测了可能发生的化学反应,研究了引发脱硫反应的力学因素,认为水射流引起的剪切应力场作用是脱硫反应发生的主要原因。

    Abstract:

    The radial tyre tread rubber was powdered by ultra-high pressure water jet for recycling, and NMR, FT-IR, SEM and grain size analysis were performed to study the physical and chemical structure of the rubber partial. It is found that the tread rubber is desulfurized at room temperature during the powder process. With increase of the pressure, the desulfurization degree rises firstly to achieve the optimal degree at 200 MPa, the NMR signal of internal chains reduces to 54.85%, after that the desulfurization degree reduces. The desulfurization mechanism was discussed and the shear stress field caused by ultra-high pressure water jet is considered to be the major reason of the desulfurization.

    参考文献
    相似文献
    引证文献
引用本文

宋守许, 田光涛, 查辉, 余德桥.超高压水射流破碎轮胎橡胶的脱硫机理[J].高分子材料科学与工程,2014,30(9):101-105.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2014-09-22
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@163.net; gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司