致孔剂对PVDF-g-PNIPAAm温度敏感膜成膜过程及膜性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB383.2

基金项目:

国家自然科学基金资助项目(21174103,21074091,51003076);教育部科学技术研究重点项目(209005);天津市应用基础研究项目(10JCZDJC22000)资助


Influence of Pore-Forming Agent on the Membrane Formation Process and Properties of PVDF-g-PNIPAAm Temperature-Sensitive Membrane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用热力学相图和超声时域反射法研究了致孔剂聚乙二醇(PEG)对聚偏氟乙烯-g-聚N-异丙基丙烯酰胺(PVDF-g-PNIPAAm)成膜过程的影响。结果表明,在PVDF-g-PNIPAAm/DMF/H2O成膜体系中添加PEG后,促进了成膜体系的分相,体系变得更不稳定。加入PEG后,使得PVDF-g-PNIPAAm/DMF/H2O成膜体系的成膜速度加快,体系更容易发生瞬时液液分相,导致膜孔尺寸增加,纯水通量提高,但温度响应性能不明显。

    Abstract:

    The influence of pore-forming agent polyethylene glycol(PEG) on poly(vinylidene fluoride) grafting poly(N-isopropylacrylamide)(PVDF-g-PNIPAAm)temperature-sensitive membrane formation mechanism was studied by the phase diagram(thermodynamics)and ultrasonic time-domain reflectometry(kinetics)(UTDR).The results show that the addition of PEG to the casting solution promotes the phase separation process and decreases the thermodynamical stability of the PVDF-g-PNIPAAm/ N,N-dimethylformamide(DMF)/H2O system.The addition of PEG to the casting solution increases the membrane-forming speed and promotes the occurrence of instantaneous phase separation.Adding PEG to the casting solution increases the membrane pore size and water flux,but decreases the temperature-sensitivity.

    参考文献
    相似文献
    引证文献
引用本文

冯霞,郭艳芬,赵义平,李建新,陈熙,陈莉.致孔剂对PVDF-g-PNIPAAm温度敏感膜成膜过程及膜性能的影响[J].高分子材料科学与工程,2012,28(10):26-29. Xia Feng, Yanfen Guo, Yiping Zhao, Jianxin Li, Xi Chen, Li Chen. Influence of Pore-Forming Agent on the Membrane Formation Process and Properties of PVDF-g-PNIPAAm Temperature-Sensitive Membrane[J]. Polymer Materials Science & Engineering,2012,28(10):26-29.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司