纸包装油墨中增塑剂向食品模拟物Tenax的迁移
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TS206

基金项目:

国家自然科学基金资助项目(21077045,21277061);国家科技支撑计划项目(2009BADB9B04-01);中央高校基本科研业务费专项资金资助(21611360);中央高校基本科研业务费专项资金资助(21611460);暨南大学创新基金资助


Migration of Plasticizers from Paper Packaging Inks to Tenax
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过纸张表印油墨的实验室印制方法,模拟真实纸包装油墨中四种增塑剂向食品模拟物Tenax的迁移,使用气相色谱法检测不同温度(50℃、70℃和100℃)、纸张克重(240g/m2和400g/m2)和增塑剂初始含量下的迁移量。结果表明,纸包装油墨中增塑剂的迁移行为由其扩散系数和分配系数决定,温度和纸张克重对增塑剂迁移行为影响较大,实际中要避免增塑剂的迁移对人体造成的危害。

    Abstract:

    A series of food safety incidents have caused widespread concern over the safety of plasticizer.Three phthalates(dibutyl phthalate(DBP),bis(2-ethylhexyl) phthalate(DEHP),di-n-octyl phthalate(DOP)) and a new environmental plasticizer acetyl tributyl citrate(ATBC) are commonly used in inks.Gas chromatography (GC) was used to measure the migration of four plasticizers from inks in lad-made printing paper to food stimulant(Tenax) at different temperature(50 ℃,70 ℃ and 100 ℃),different paper weight(240g/m2 and 400 g/m2) and the different initial content of plasticizers.The results show that the lab-made printing paper can stimulate the real paper packaging with inks and the migration of plasticizers from inks depends on the diffusion and partition coefficients.The migration behaviour is significantly affected by the temperature and paper weight. Maximum migration increases with increasing temperature and decreasing paper weight.

    参考文献
    相似文献
    引证文献
引用本文

高松,王志伟,胡长鹰.纸包装油墨中增塑剂向食品模拟物Tenax的迁移[J].高分子材料科学与工程,2012,28(10):30-33. Song Gao, Zhiwei Wang, Changying Hu. Migration of Plasticizers from Paper Packaging Inks to Tenax[J]. Polymer Materials Science & Engineering,2012,28(10):30-33.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司