UHMWPE纤维的表面交联改性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ342.61

基金项目:


Surface Crosslinking Modification of UHMWPE Fibers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选用三聚氰酸三丙烯酯(TAC)作为交联剂对超高分子量聚乙烯(UHMWPE)纤维进行紫外辐照交联改性,探讨了正庚烷浸泡时间、交联剂浓度、紫外线辐照时间等因素对UHMWPE纤维表面交联效果及纤维蠕变性能的影响。采用红外光谱、扫描电子显微镜及力学性能测试等多种手段对交联改性前后UHMWPE纤维的结构进行表征。结果表明,UHMWPE在正庚烷中的最佳浸泡时间为24h;紫外线辐照最佳时间为1.5 h;经交联改性后UHMWPE纤维的抗蠕变性能有较明显提高。

    Abstract:

    [2,4,6-tris(2-propenyloxy)-1,3,5-triazine](TAC) was chosen as crosslinking agent for the ultra-high molecular weight polyethylene(UHMWPE) fiber surface crosslinking modification initiated by ultraviolet radiation.Influence of n-heptane soaking time,concentration of the crosslinking agent and ultraviolet radiation time on the effectiveness of the surface cross-linking as well as the improvement of the creep properties of UHMWPE were discussed.IR,SEM and creeping test were conducted to characterize the crosslinking structure and creeping properties of the UHMWPE fiber.The results show that,the best soaking time of the fiber in n-heptane is 24 h and the best time of UV irradiation is 1.5 h.After crosslinking modification,the creep resistance of UHMWPE fiber is obviously improved.

    参考文献
    相似文献
    引证文献
引用本文

徐明忠,赵国樑. UHMWPE纤维的表面交联改性[J].高分子材料科学与工程,2012,28(10):59-62. Mingzhong Xu, Guoliang Zhao. Surface Crosslinking Modification of UHMWPE Fibers[J]. Polymer Materials Science & Engineering,2012,28(10):59-62.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司