鞣酸模板交联壳聚糖/凹凸棒粘土复合树脂的吸附性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

X703

基金项目:

国家自然科学基金资助项目(5117409621174046)


Adsorption Properties of Crosslinked Chitosan/Attapulgite Composite Resin with Tannic Acid as Template Molecule
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以鞣酸(TA)为模板,采用乳化交联法制备了壳聚糖/凹凸棒粘土复合树脂(TA-CAR)。利用红外光谱(FT-IR)和扫描电镜(SEM)对树脂的结构和形态进行表征。结果表明,与非模板树脂相比,TA-CAR对TA的吸附量从185 mg/g提高到232 mg/g,且具有一定的吸附选择性,树脂的吸附等温线和动力学可以用Langmuir方程和伪二级动力学模型很好地拟合,TA-CAR较高的吸附能力归因于树脂中特异吸附位点的识别作用和表面吸附的协同作用。树脂的再生性能研究表明,凹土的加入不但提高了复合树脂的吸附量,而且显著改善了树脂的耐酸能力,可实现树脂的再生利用。

    Abstract:

    The crosslinked chitosan/attapulgite composite resin(TA-CAR) was prepared by emulsion cross-linking with tannic acid(TA) as template molecule.The structure and the morphology of the resin were characterized by FT-IR and SEM,respectively.Compared with non-template resin(185 mg/g),TA-CAR shows higher adsorption selectivity and higher adsorption capacity(232 mg/g) for TA at the same adsorption conditions.The study of adsorption kinetics and isotherms shows that the sorption processes are better fitted by the pseudo-second-order equation and the Langmuir equation,respectively.The higher adsorption capacity of TA-CAR maybe attribute to the synergistic effect of special recognition site and surface adsorption on the resin.Furthermore,the desorption study implies that the introduction of attapulgite not only improves the absorbability,but also enhances the acid resistance of the resin,which ensures the recyclable of the composite resin.

    参考文献
    相似文献
    引证文献
引用本文

吴洁,张娟,冯辉霞,丁师杰,许培.鞣酸模板交联壳聚糖/凹凸棒粘土复合树脂的吸附性能[J].高分子材料科学与工程,2012,28(10):81-84,89. Jie Wu, Juan Zhang, Huixia Feng, Shijie Ding, Pei Xu. Adsorption Properties of Crosslinked Chitosan/Attapulgite Composite Resin with Tannic Acid as Template Molecule[J]. Polymer Materials Science & Engineering,2012,28(10):81-84,89.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司