废丁苯胶乳/废聚酯纤维高强高模复合材料的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB332

基金项目:

国家自然科学基金资助项目(51073108)


Preparation and Characterization of High Strength and High Modulus Composites Based on Waste Styrene-Butadiene Rubber Latex and Scrap Polyester Fiber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用液相高剪切混合、共沉预处理技术改善纤维在橡胶基体中的分散及其界面结合,制备了废丁苯胶乳/废聚酯纤维高强高模复合材料,并系统研究了复合材料的硫化特性、力学性能、动态力学性能和断面微观形貌。结果表明,当纤维的质量分数为60%时,复合材料具有最佳的力学性能,其拉伸强度为23.2 MPa,而未填充纤维的硫化胶强度仅为9.3MPa;同时,室温下材料的储能模量提高了约19倍。

    Abstract:

    The high strength and high modulus composites were successfully prepared from waste styrene-butadiene rubber(SBR) latex and scrap polyester fiber.The high-speed shear mixing in liquid and subsequently coagulation technology were used to enhance the fiber dispersion and interfacial adhesion between fiber and rubber matrix.The curing behavior,mechanical properties,dynamic mechanical properties and morphology of the obtained composites were investigated in detail.The results indicate that with the addition of 60% fiber,the tensile strength of SBR increases significantly from its original 9.3 MPa to 23.2 MPa.Furthermore,the storage modulus at ambient temperature is enhances by 19 times.

    参考文献
    相似文献
    引证文献
引用本文

刘勇,张新星,田东,卢灿辉.废丁苯胶乳/废聚酯纤维高强高模复合材料的制备与性能[J].高分子材料科学与工程,2012,28(10):99-101. Yong Liu, Xinxing Zhang, Dong Tian, Canhui Lu. Preparation and Characterization of High Strength and High Modulus Composites Based on Waste Styrene-Butadiene Rubber Latex and Scrap Polyester Fiber[J]. Polymer Materials Science & Engineering,2012,28(10):99-101.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司