熔融挤出温度对PA1010/CaCl2复合材料结构与性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.6

基金项目:

国家自然科学基金资助项目(50863001)


The Effect of Molten Extrusion Temperature on the Structure and Properties of PA1010/CaCl2 Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过共混挤出制备了尼龙1010(PA1010)/CaCl2复合材料,研究了挤出温度对PA1010/CaCl2复合材料结构与性能的影响。结果表明,随着挤出温度的提高,PA1010/CaCl2复合材料的结晶度越小,结晶不完善程度越大;PA1010/CaCl2复合材料的拉伸强度随熔融挤出温度的提高存在极值现象,冲击强度随熔融挤出温度的提高而增加,弯曲强度随挤出温度的提高而降低。提高挤出温度会降低PA1010/CaCl2复合材料的热变形温度。

    Abstract:

    PA1010/CaCl2 composites were prepared through melting extrusion process,structure and properties of PA1010/CaCl2 composites were studied in term of molten extrusion temperature.The following results show that with the increase of the molten extrusion temperature,the deeper the complex degree of the PA1010 and CaCl2 is,the smaller the crystallinity of the PA1010/CaCl2 composites is,the more the crystal degree is imperfect;the stronger the Izod impact strength is and the weaker the flexural strength is.But with the increase of the molten extrusion temperature,the tensile strength of the PA1010/CaCl2 composites has the extreme point,and the thermal deformation temperature of the PA1010/CaCl2 composites reduces.

    参考文献
    相似文献
    引证文献
引用本文

周志敏,鲁圣军,何敏,于杰.熔融挤出温度对PA1010/CaCl2复合材料结构与性能的影响[J].高分子材料科学与工程,2012,28(10):106-109. Zhimin Zhou, Shengjun Lu, Min He, Jie Yu. The Effect of Molten Extrusion Temperature on the Structure and Properties of PA1010/CaCl2 Composites[J]. Polymer Materials Science & Engineering,2012,28(10):106-109.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司