苯硅醇改性环氧树脂的透明性及耐湿热性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.5

基金项目:

辽宁省自然科学基金资助项目(930002)


Transparency and Hygrothermal Properties of Epoxy Resin Modified with Phenylsilanol
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用一苯基硅三醇单体(CAB)为改性剂,与环氧树脂(EP)接枝共聚,制备EP-CAB共聚物。采用红外光谱(FT-IR)对其结构表征,通过透光率、折射率、热重分析(TGA)、吸水率和接触角等手段,对其光学性能、耐热性和耐湿性分析。结果表明,共聚物分子链上有Si-O-C键生成;当CAB质量分数为10%时,EP-CAB共聚物的折射率为1.5337,在300 nm~800 nm紫外-可见范围内,其透光率均高于80%,优于EP;CAB的加入使共聚物的耐热性明显提高;当CAB质量分数为10%时,其接触角和吸水率分别为85.1°和0.2125%。

    Abstract:

    EP-CAB copolymers were prepared by graft polymerization using epoxy resin(EP) and phenylsilanol monomer(CAB).The structures of EP-CAB copolymers were analyzed by Fourier transform infrared spectrum(FT-IR).The optical properties,heat resistance and waterlogging tolerance of copolymers were analyzed by the index,transmittance,TGA,water absorption and contact angle.The results indicate that Si-O-C bond is formed in molecular chains of EP-CAB copolymers.The index reaches 1.5337 after modification with CAB of 10%.In ultraviolet-visible range 300 nm to 800 nm,the transmittance of copolymers is above 80%.With adding CAB,the heat resistance of copolymers significantly improves.When CAB mass fraction is 10%,the water absorption and contact angle of copolymers is 0.2125% and 85.1°,respectively.

    参考文献
    相似文献
    引证文献
引用本文

冯钠,张小扉,马春,王林,吕汶泽.苯硅醇改性环氧树脂的透明性及耐湿热性能[J].高分子材料科学与工程,2012,28(1):63-66. Na Feng, Xiaofei Zhang, Chun Ma, Lin Wang, Wenze Lv. Transparency and Hygrothermal Properties of Epoxy Resin Modified with Phenylsilanol[J]. Polymer Materials Science & Engineering,2012,28(1):63-66.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司