乙醇胺改性酰亚胺聚酯聚氨酯的热性能及热解过程
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.8

基金项目:

江苏省材料学重点学科基金资助(2009)


Thermal Properties and Pyrolysis Process of Poly(Urethane-Ester-Imide) Modified with Ethanolamine
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了前文所制备酰亚胺聚氨酯的热性能及热解过程。研究采用了不同温度及不同热老化条件下的拉伸试验、热分析(TGA)与质谱(MS)的联用技术(TGA-co-MS)和红外光谱(FT-IR)的多技术研究方法。研究表明,酰亚胺聚氨酯在100℃或230℃热老化2 h后仍显示较好的力学性能。酰亚胺聚氨酯热解过程检测到荷质比分别为44、54、56、84、88、95、106的7种离子分子。其中荷质比为44的离子分子是主要的热解产物,来自于分子链中的酯键和氨基甲酸酯键的热解。酰亚胺结构的引入对分子链中氨基甲酸酯键及酯键起到较好的屏蔽作用,显著提高了聚氨酯的耐温性和热老化性能。

    Abstract:

    The thermal properties and pyrolysis of the poly(urethane-ester-imide)(PUEI) reported previously were studied in this paper.It was researched by the poly-technics method of tensile measurement at various temperature or after heat aging at higher temperature,Fourier transform infrared spectrum(FT-IR) and thermogravimetric analysis(TGA)-co-mass spectrometry(MS).The results show that: The PUEI is behaved good mechanical properties at 100 ℃ or heat aging 2 hrs at 230 ℃.Seven ions with the m/e as 44、54、56、84、88、95、106 are checked in the pyrolysis of the PUEI.The ion with m/e as 44 is the main decomposed substance from pyrolisis of ester and urethane group in macromolecular chain.The heat resistance and heat aging properties of the PUEI are enhanced by the protection of the imide group to the close ester and urethane group.

    参考文献
    相似文献
    引证文献
引用本文

左晓兵,陈霜,潘丹,朱亚辉,稽卫平.乙醇胺改性酰亚胺聚酯聚氨酯的热性能及热解过程[J].高分子材料科学与工程,2012,28(1):79-81,85. Xiaobing Zuo, Shuang Chen, Dan Pan, Yahui Zhu, Weiping Ji. Thermal Properties and Pyrolysis Process of Poly(Urethane-Ester-Imide) Modified with Ethanolamine[J]. Polymer Materials Science & Engineering,2012,28(1):79-81,85.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司