PPENK增韧改性BMI树脂体系的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ320.1

基金项目:

国家自然科学基金资助项目(50703004)


The Preparation and Properties of PPENK Modified BMI Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用溶液法制备了杂萘联苯聚芳醚腈酮(PPENK)/双马来酰亚胺树脂(BMI)共混体系。通过差示扫描量热法(DSC)对共混体系固化反应动力学进行了研究,固化活化能为85.8 kJ/m2。采用冲击和拉伸实验考察了PPENK含量对共混体系力学性能的影响,共混体系的冲击强度为1.83 kJ/m2~2.95 kJ/m2,拉伸强度为68 MPa~84 MPa,拉伸模量为1.14 GPa~1.53 GPa。通过对固化物断面的扫描电镜(SEM)分析了增韧机理,改性后的BMI树脂在断裂时发生了塑性变形。通过热重分析法(TGA)研究了体系的耐热性,共混体系在氮气气氛中5%热失重温度为420℃~426℃。

    Abstract:

    The blends of bismaleimide resin/poly(phthalazinone ether nitrile ketone)(BMI/PPENK) were prepared by the solvent method.The curing kinetics of PPENK/BMI blends was investigated by DSC,and the curing activation energy of the blend was 85.8 kJ/m2.The effect of the PPENK content on the mechanical property of the blends was studied by the impact and tensile test.The impact strength of blends is in the range of 1.83 kJ/m2~2.95 kJ/m2,the tensile strength is between 68 MPa and 84 MPa,and the tensile modules ranges from 1.14 GPa to 1.53 GPa.The toughening mechanism of blends was analyzed by SEM,and the plastic deformation occurred during the fracture of the modified BMI resins.The thermal properties of blends were investigated by TGA.The blends have good thermal stability with 5% weight loss temperature in the range of 420 ℃~426 ℃ under nitrogen atmosphere.

    参考文献
    相似文献
    引证文献
引用本文

上官久桓,廖功雄,刘程,周红欣,卢冬明,蹇锡高. PPENK增韧改性BMI树脂体系的制备与性能[J].高分子材料科学与工程,2012,28(1):89-92. Jiuhuan Shangguan, Gongxiong Liao, Cheng Liu, Hongxin Zhou, Dongming Lu, Xigao Jian. The Preparation and Properties of PPENK Modified BMI Resin[J]. Polymer Materials Science & Engineering,2012,28(1):89-92.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司