氰酸酯/环氧树脂的固化反应历程
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.5

基金项目:


Curing Reaction Route Between Cyanate Ester and Epoxy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用傅里叶红外光谱仪研究了4种不同比例的氰酸酯(CE)/环氧树脂(EP)混合体系在一系列固化温度下固化后的产物组成,结果证实了6步反应的存在。当EP含量高时,体系生成物主要是口恶唑烷酮和部分异氰酸脲,而三嗪环很不显著;EP含量低时,首先形成三嗪环,然后三嗪环与环氧生成口恶唑烷酮或异氰酸脲。反应温度较低时(≤160℃),CE首先生成三聚体,再同环氧反应生成口恶唑啉、口恶唑烷酮以及异氰酸脲;在较高温度下固化时(160℃~180℃),主要进行的是三聚氰酸酯重排生成异氰酸脲的反应以及异氰酸脲同环氧官能团生成口恶唑烷酮的反应。生成物组成的差异是影响固化物宏观性能,如耐热性的根本原因。

    Abstract:

    FT-IR was selected to analyze the curing products of cyanate ester(CE) modified epoxy(EP) systems with verified epoxy resin proportion and different curing conditions.IR spectra show that six different reactions are involved in the curing route between cyanate and the epoxy resin as reported.Cyanurate was mainly consumed to form oxazolidinone and partly isocyanurate in the system with higher epoxy content.In the system with fewer EP,however,there still a large part of cyanurate was reserved.When the curing temperature is below 160 ℃,the trimerization of cyanate ester dominated the curing reaction.Only a small part of cyanate reacted with epoxy group directly to form oxazoline,oxazolidinone and isocyanurate.The reaction involved the cyanurate rearrangement to isocyanurate was dominated when temperature was about 180 ℃.The obtained isocyanurate was sequently reacted with EP to form oxazolidinone.The different properties(especially thermal properties) of the curing products were determined by these diversely components.

    参考文献
    相似文献
    引证文献
引用本文

洪旭辉,李亚锋.氰酸酯/环氧树脂的固化反应历程[J].高分子材料科学与工程,2012,28(1):105-108. Xuhui Hong, Yafeng Li. Curing Reaction Route Between Cyanate Ester and Epoxy[J]. Polymer Materials Science & Engineering,2012,28(1):105-108.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司