亚麻纤维增强聚乳酸可降解复合材料的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB332

基金项目:

国家自然科学基金资助项目(10772164,11172272);河南省自然科学基础研究项目(2010A430018);2010年河南省科技创新杰出人才项目


Fabrication and Properties of Flax-Reinforced PLA Degradable Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将制浆造纸用亚麻短纤维与聚乳酸(PLA)熔融共混,用注塑方法成型亚麻纤维/聚乳酸复合材料试样。通过差示扫描量热实验(DSC)、动态力学性能测试(DMA)、热重分析(TGA)和力学性能测试等方法,研究了聚乳酸和亚麻纤维在不同质量配比下,复合材料热性能、动态力学性能和力学性能的变化规律。随着亚麻纤维的加入,复合材料的结晶度增大,热稳定性增强,储能模量得到提高,力学性能也有了明显变化:纤维含量为20%时,拉伸强度为45.88 MPa,比纯PLA的增加了21%;同时,弯曲模量的增幅达到30%。

    Abstract:

    With the increasing shortage of fossil oil and critical demanding for environment protection,biodegradable materials are receiving more attention.In this paper,polylactic acid(PLA) and flax short fiber used for pulp and paper making were melted and plasticized at 165 ℃,different content flax and PLA blends were then injection molded to produce degradable specimen.Changes of thermal properties,thermal stability and mechanical properties of composites were analyzed with DSC,TGA,DMA and mechanical test,respectively.It is found that degree of crystallization,thermal stability,storage modulus,tensile strength and flexural modulus are enhanced obviously with the increase of flax content.The degree of crystallization increases from 14.44% to 19.18%.Compared to that of pure PLA,tensile strength of composites with 20% flax content is increased by 21%,and the flexural modulus of composites is increased by 30%.

    参考文献
    相似文献
    引证文献
引用本文

厉国清,张晓黎,陈静波,申长雨,纪又新.亚麻纤维增强聚乳酸可降解复合材料的制备与性能[J].高分子材料科学与工程,2012,28(1):143-146. Guoqing Li, Xiaoli Zhang, Jingbo Chen, Changyu Shen, Youxin Ji. Fabrication and Properties of Flax-Reinforced PLA Degradable Composites[J]. Polymer Materials Science & Engineering,2012,28(1):143-146.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司