负载纳米MnO2的吸附纤维室温下对甲醛的吸附分解
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB383.1

基金项目:


Adsorption and Decomposition of Formaldehyde at Room Temperature Using the Adsorbing Polymer Fibers Loaded Nano-MnO2
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将纳米MnO2催化剂粉末负载到自制的含活性炭的腈氯纶纤维上,在室温下对甲醛进行吸附分解研究。借助扫描电子显微镜(SEM)进行显微结构观察,并分析了不同处理情况的负载纤维对甲醛的去除率。结果表明,研磨6h的MnO2粉末分散均匀,平均粒径可达300 nm,以平铺的形式均匀地负载于纤维上;研磨6h的MnO2粉末反应72h对甲醛的去除率达94.07%;二甲基甲酰胺(DMF)处理后的纤维对甲醛的去除率有所提高。

    Abstract:

    The acrylonitrile-vinylidene chloride(AN-VDC) copolymer fiber containing actived carbon(AC) loaded nano-MnO2 had been made in the laboratory.The fiber was applied to adsorb and decompose formaldehyde at room temperature.The micro-structure of AC/P(AN-VDC)F-MnO2 was investigated by scanning electron microscope(SEM) and the removal efficiency of formaldehyde of AC/P(AN-VDC)F-MnO2 after treated were analyzed.The experimental result shows that,the MnO2 microparticles scatter uniformally after grinded for 6h,the average diameter is 300nm approximately,loading on the surface of fiber in flat successfully.The removal efficiency of formaldehyde of MnO2 grinded for 6h is up to 94.07% after 72h,and it increases after treated with N,N-dimethyl formamide(DMF).

    参考文献
    相似文献
    引证文献
引用本文

王涵,张华,张文华,任志龙,韩文清.负载纳米MnO2的吸附纤维室温下对甲醛的吸附分解[J].高分子材料科学与工程,2012,28(1):158-162. Han Wang, Hua Zhang, Wenhua Zhang, Zhilong Ren, Wenqing Han. Adsorption and Decomposition of Formaldehyde at Room Temperature Using the Adsorbing Polymer Fibers Loaded Nano-MnO2[J]. Polymer Materials Science & Engineering,2012,28(1):158-162.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司