具有键合功能热塑性聚氨酯的表面性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.8

基金项目:

基础产品创新计划火炸药专项资助(A2220061373)


Surface Properties of Thermoplastic Polyurethane Elastomer with Bonding Functions
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过反相气相色谱法(IGC),采用非极性和极性探针分子研究了新型热塑性聚氨酯弹性体(DTPU)的色散表面自由能和表面Lewis酸碱性质,并与传统的推进剂用热塑性聚氨酯粘合剂(BTPU)做了对比。结果表明,DTPU与BTPU的色散表面自由能较为接近,并且随着温度的升高而线性降低;DTPU的酸常数Ka和碱常数Kb分别为0.09和0.48,而BTPU的酸常数Ka和碱常数Kb分别为0.06和0.37,DTPU的酸性和表面总的酸碱作用能力较大,与推进剂中高能固体填料具有更好的相互作用。

    Abstract:

    Inverse gas chromatography(IGC) was employed to investigate the dispersive component of the surface free energy and the surface acid-base properties of the thermoplastic polyurethane elastomer(DTPU),surface properties of which were then compared with those of the traditional thermoplastic polyurethane elastomer(BTPU) that can be used as the propellant binder.It is found that the dispersive component of the surface free energy of DTPU is close to that of BTPU and the dispersive component of the surface free energy decreases linearly with increasing temperature.The Lewis acidic number Ka and the basic number Kb of DTPU are 0.09 and 0.48 respectively.The surface Lewis base number and total acid-basic ability of DTPU are higher than those of BTPU,whose Lewis acidic number is 0.06 and basic number is 0.37.Therefore,DTPU has better interactions with high-energy solid fillings.

    参考文献
    相似文献
    引证文献
引用本文

张文雨,李晋庆,罗运军.具有键合功能热塑性聚氨酯的表面性能[J].高分子材料科学与工程,2012,28(2):28-31. Wenyu Zhang, Jinqing Li, Yunjun Luo. Surface Properties of Thermoplastic Polyurethane Elastomer with Bonding Functions[J]. Polymer Materials Science & Engineering,2012,28(2):28-31.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司