聚合反应条件对甲基丙烯酸缩水甘油酯/丙烯酸丁酯乳液共聚体系凝胶的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O631.3

基金项目:

吉林省科技支撑计划资助(20086022)


Influence of the Reactive Conditions on Gel Content of Butyl Acrylate-co-Glycidyl Methacrylate Emulsion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将丙烯酸丁酯(BA)与甲基丙烯酸缩水甘油酯(GMA)进行乳液共聚合以制备环氧型聚丙烯酸酯橡胶(ACM),通过对ACM中凝胶含量及环氧基开环率的对比研究,探讨了不同反应条件对凝胶含量的影响。结果表明,在反应体系中加入20%的第二单体丙烯酸乙酯(EA)、选择复合引发体系、反应温度控制在30℃以及在反应体系对单体需求处于饥饿状态下投料可抑制BA链转移和GMA中的环氧基开环,聚合物中凝胶含量可低达2.9%。

    Abstract:

    The epoxy acrylic rubber was prepared by emulsion copolymerization of butyl acrylate(BA) and glycidyl methacrylate(GMA).By a comparative study on the ratio of epoxy-opening and gel content,the influence of the different reactive conditions on gel content was discussed.The results show that ethyl acrylate(EA) content,organic redox complex initiating system,reactive temperature of 30 ℃ and monomer feeding in "starve" state can restrain intermolecular transferring of BA and ring-opening of epoxy groups of GMA and decrease gel content.The gel content is 2.9%.

    参考文献
    相似文献
    引证文献
引用本文

任秀艳,吴广峰,孙树林,张希艳.聚合反应条件对甲基丙烯酸缩水甘油酯/丙烯酸丁酯乳液共聚体系凝胶的影响[J].高分子材料科学与工程,2012,28(2):57-59,63. Xiuyan Ren, Guangfeng Wu, Shulin Sun, Xiyan Zhang. Influence of the Reactive Conditions on Gel Content of Butyl Acrylate-co-Glycidyl Methacrylate Emulsion[J]. Polymer Materials Science & Engineering,2012,28(2):57-59,63.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司