多级拉伸PP/(PA1010+CB)复合材料的相形态演变
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB332

基金项目:

国家自然科学基金资助项目(50603016,50773047和50933004)


Phase Morphologies of Polypropylene/Polyamide1010/Carbon Black Composites Prepared Through Multistage Stretching Extrusion
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用自主设计的多级拉伸挤出设备,制备了聚丙烯/(聚酰胺+炭黑)(PP/(PA1010+CB))复合材料,该聚合物熔体在挤出过程中受纵向拉伸力(F∥)和横向拉伸力(F⊥)的双向拉伸作用。通过扫描电子显微镜观察,随着分散相(PA1010+CB)含量的增加,CB在PA1010中含量的增加,相容剂含量的降低,分散相(PA1010+CB)的尺寸变大且变形能力增强,此时F⊥发挥作用,使分散相发生横向变形。体系中尺寸较大的分散相形成二维片状,尺寸较小的分散相形成纤维状。

    Abstract:

    The polypropylene/polyamide1010/carbon black(PP/PA1010/CB) composites were prepared through multistage stretching extrusion.When the polymeric melts flowed through one laminating-multiplying elements(LME),there were two forces that longitudinal stretching force(F∥) and transverse tensile force(F⊥) produced and made the melts thinner and wider,similar to a biaxial-stretching process.The morphology of the blends was studied by scanning electron microscope(SEM).The results show that as the contents of(PA1010 + CB) and CB in the PA1010 increase,or the percentage of compatible agent decreases,F⊥ plays a role in the transverse deformation after the dispersed phase becomes bigger and more easier to deform.So both fibrous and lamellate dispersed phase in the composites were found.

    参考文献
    相似文献
    引证文献
引用本文

万芬,孙小杰,喻琴,陈凡,李姜,郭少云.多级拉伸PP/(PA1010+CB)复合材料的相形态演变[J].高分子材料科学与工程,2012,28(2):84-86,91. Fen Wan, Xiaojie Sun, Qin Yu, Fan Chen, Jiang Li, Shaoyun Guo. Phase Morphologies of Polypropylene/Polyamide1010/Carbon Black Composites Prepared Through Multistage Stretching Extrusion[J]. Polymer Materials Science & Engineering,2012,28(2):84-86,91.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司