A one-step foaming process(rapid depressurization method) was applied to the one-dimension and two-dimensions constrained foaming of polystyrene(PS) using supercritical carbon dioxide as blowing agent.The effect of temperature(in the range of 50 ℃~100 ℃),pressure(in the range of 9 MPa~18 MPa) and depressurization rate(in the range of 0.38 MPa/s~48.1 MPa/s) on the final microcellular structure has been investigated.The results show that in one-dimension foaming condition,the degree of cell orientation becomes more obvious with increasing the foaming space.Besides,when blow-hole plate is used as barrier constraints,the saturation time does not increase significantly,however,the cell growth will be restrained dramatically under the relative high temperature,low pressure and depressurization rate conditions,and uniform cell size distribution is achieved.
参考文献
相似文献
引证文献
引用本文
连小松,许志美,刘涛,赵玲.超临界二氧化碳中聚苯乙烯的受限发泡[J].高分子材料科学与工程,2012,28(2):105-108. Xiaosong Lian, Zhimei Xu, Tao Liu, Ling Zhao. Constrained Foaming of Polystyrene with Supercritical Carbon Dioxide[J]. Polymer Materials Science & Engineering,2012,28(2):105-108.