以松香为功能单体的苯乙烯丙烯酸酯乳液(SAE)表面施胶剂的制备及表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技部国际科技合作项目(中国和加拿大,2008DFA91290);天津市科技创新体系及条件平台建设计划项目(10SYSYJC28000)


Preparation and Characterization of Styrene Acrylate Emulsion(SAE) Surface Sizing Agent with Rosin as Functional Monomer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用低黏度阳离子淀粉(CS-8)的乳化、分散作用,采用无皂乳液聚合的方法,以苯乙烯(St)、丙烯酸丁酯(BA)、甲基丙烯酸甲酯(MMA)为主要原料,引入松香作为功能单体,合成了核壳型阳离子苯乙烯丙烯酸酯乳液(SAE)。讨论了其合成影响因素,并优化了合成工艺条件;用扫描电子显微镜(SEM)、红外光谱仪、激光粒度仪和电荷密度测定仪(PCD)对产物进行了表征。研究表明,当w(CS-8)=8%,w(APS)=0.5%,w(松香)=2%时,所制SAE无皂乳液性能优异,施胶效果良好。在SAE制备过程中添加松香作为功能性单体,能明显改善经SAE表面施胶后纸页的抗水性能。

    Abstract:

    A series of core-shell type cationic soap-free latex were prepared by using styrene(St),butyl acrylate(BA) and methyl methacrylate(MMA) as main materials and introducing rosin as the functional monomer.In this reaction,starch(CS-8),which has low relative viscosity,was used as the emulsifier and dispersant.The influencing factors of the reaction have especially been studied and the optimum conditions have been got.Then the products were characterized by using SEM,IR,laser particle sizer and particle charge detector(PCD).The results show that the excellent performance and good sizing effects of styrene acrylate emulsion (SAE) were achieved when the reaction conditions are as follows: the starch amount is 8%,the charge for the initiator(APS) is 0.5%,the amount of rosin is 2%.And the water-resistant performance of paper is improved significantly when the rosin is chose as the functional monomer.

    参考文献
    相似文献
    引证文献
引用本文

徐建峰,胡惠仁.以松香为功能单体的苯乙烯丙烯酸酯乳液(SAE)表面施胶剂的制备及表征[J].高分子材料科学与工程,2012,28(2):132-136. Jianfeng Xu, Huiren Hu. Preparation and Characterization of Styrene Acrylate Emulsion(SAE) Surface Sizing Agent with Rosin as Functional Monomer[J]. Polymer Materials Science & Engineering,2012,28(2):132-136.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司