PET固相缩聚进展
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.41

基金项目:

国家自然科学基金资助项目(50973059);上海市科委资助课题(10JC1405200)


Progress of Solid-State Polycondensation of Poly(Ethylene Terephthalate)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    固相缩聚是20世纪60年代开始发展起来的新型缩聚反应方式,有利于降低反应过程中的降解反应和副反应;对常规聚对苯二甲酸乙二醇酯(PET)切片进行固相缩聚处理可以大幅提高PET分子量,其产品的性能得到较大幅度的提升。文中首先对PET固相缩聚的反应过程、速度控制等反应机理进行了介绍,然后从原料粒子内部和外部两方面对PET固相缩聚反应的影响因素进行了分析,最后指出PET固相缩聚目前的研究情况和研究趋势。

    Abstract:

    Solid-state polycondensation is the new way of condensation polymerization from 1960s.It is good for decreasing degradation reaction or secondary reaction in the reaction process.There is an obviously increasing of molecular weight when common polyethylene terephthalate(PET) particles take place solid-state polycondensation in a appropriate conditions,thus could largely increase the property of the product.In this article,firstly the reaction mechanism of the solid-state polycondensation of PET particles was introduced,such as reaction process and speed control mechanism;secondly,the influence factor of solid-state polycondensation of PET particles from the interior and exterior of raw material was analysed;at last,it was pointed out that the research situation of the solidstate polycondensation of PET particles at the moment,and the research prospect and development trends were forecasted.

    参考文献
    相似文献
    引证文献
引用本文

周杰,刘丽,黄星,史君. PET固相缩聚进展[J].高分子材料科学与工程,2012,28(2):147-151. Jie Zhou, Li Liu, Xin Huang, Jun Shi. Progress of Solid-State Polycondensation of Poly(Ethylene Terephthalate)[J]. Polymer Materials Science & Engineering,2012,28(2):147-151.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司