室温交联水性聚氨酯施胶增强剂的合成及增强机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TS727.5

基金项目:

陕西科技大学研究生创新基金项目;国家自然科学基金资助项目(50973057和51103081);陕西农产品加工技术研究院(2008ZDKG-51)


Preparation and Mechanism of Self-Crosslinkable Waterborne Polyurethane Sizing Strengthening Agent
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    用异佛尔酮二异氰酸酯(IPDI)与聚四氢呋喃二醇(PTMG1000)和自制扩链剂N-[(1,1-二甲基-2-乙酰基)乙基]-β-二羟乙氨基丙酰胺(DDP)等,通过外加己二酸二酰肼(ADH)合成了室温交联型水性聚氨酯。通过衰减全反射傅里叶变换红外光谱(ATR-FT-IR)、X射线光电子能谱(XPS)和激光散射粒径仪对产物进行了表征,ATR-FT-IR分析证实了DDP的引入和乳液成膜时酮肼交联反应的发生,XPS分析证实了硅氧烷的引入,粒径分析显示随着DDP用量的增加,乳液的粒径逐渐变大且分布范围变宽。研究了n(ADH)∶n(DDP)和DDP含量对聚氨酯涂膜性能以及纸张施胶性能的影响,结果表明,在w(DDP)=3.46%,n(ADH)∶n(DDP)=1∶2时,聚氨酯涂膜的拉伸强度最大为24.658 MPa,环压指数最大为5.26 N.m2/g。扫描电镜显示聚氨酯乳液在纸张表面成膜性能优异。

    Abstract:

    Waterborne polyurethane which can be crosslinked at ambient temperature was synthesized using isophorone diisocyanate(IPDI),polytetrahydrofuran glycol(PTMG1000) and N-[(1,1-dimethyl-2-acetyl)ethyl]-β-dihydroxyethylamino propanamide(DDP)as raw materials,and then adipic dihydrazide(ADH) was added into the emulsion.The structure was characterized by ATR-FT-IR,XPS and particle size analysis.The tests results confirm the formation and reaction of DDP,and the particle size analysis indicates that the particle size increases gradually with the incensement of DDP content.The effects of n(ADH)∶n(DDP) and DDP content on the properties of the films and paper were studied.The results show that when w(DDP)=3.46% and n(ADH)∶n(DDP)=1∶2,the tensile strength reaches to 24.658 MPa,and the ring pressure index is improved by 17.9%.SEM photos show that the emulsion’s film formation property on the paper surface is good.

    参考文献
    相似文献
    引证文献
引用本文

王小荣,沈一丁,赖小娟.室温交联水性聚氨酯施胶增强剂的合成及增强机理[J].高分子材料科学与工程,2012,28(3):25-28. Xiaorong Wang, Yiding Shen, Xiaojuan Lai. Preparation and Mechanism of Self-Crosslinkable Waterborne Polyurethane Sizing Strengthening Agent[J]. Polymer Materials Science & Engineering,2012,28(3):25-28.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司