海藻酸钠接枝聚(N-乙烯己内酰胺)的合成与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ316.343

基金项目:

山东省优秀中青年科学家奖励基金(BS2009CL037)


Preparation and Property of Grafting Copolymer of Sodium Alginate and Poly(NVinylcaprolactam)
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用不同引发体系引发温敏性聚(N-乙烯己内酰胺)(PVCL)与海藻酸钠(SA)的接枝聚合反应,其中偶氮二异丁腈(AIBN)做引发剂时接枝效果最好。在AIBN作引发剂情况下,考察了引发剂浓度、反应时间以及原料配比等因素对接枝率(G)及单体接枝效率(GE)的影响,结果表明,当AIBN浓度为6×10-3mol/L,反应时间为5h,原料配比m(VCL)∶m(SA)为2∶1时,接枝效率达到最大。利用红外光谱技术以及热重分析对接枝共聚物的结构进行了表征。浊度研究表明,接枝共聚物具有较好的温敏性。

    Abstract:

    Different initiators were used to initiate the grafting polymerization of sodium alginate(SA) and temperature-responsive poly(N-vinylcaprolactam)(PVCL).When AIBN was taken as an initiator,the grafting(G) and grafting efficiency(GE) obtains the maximum,and the influences of reaction conditions on degree of G and GE have been studied.The results show that when C(I) is 6×10-3 mol/L,t is 5h,m(VCL)∶m(SA) is 2∶1 the GE of the monomer obtains the maximum.The chemical structure of prepared SA-graft-PVCL(SA-g-PVCL) was verified by infrared spectrometry(FT-IR) and TG analysis.Turbidity study reveals that grafted sodium alginates have good temperature-sensitivity.

    参考文献
    相似文献
    引证文献
引用本文

李银银,马晓梅,纪全,夏延致.海藻酸钠接枝聚(N-乙烯己内酰胺)的合成与性能[J].高分子材料科学与工程,2012,28(3):29-32,37. Yinyin Li, Xiaomei Ma, Quan Ji, Yanzhi Xia. Preparation and Property of Grafting Copolymer of Sodium Alginate and Poly(NVinylcaprolactam)[J]. Polymer Materials Science & Engineering,2012,28(3):29-32,37.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司