硅烷偶联剂KH550对Parylene C膜与金属铝基体结合强度的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TG174.4

基金项目:


Influence of KH550 Silane Coupling Agents on Adhesive Properties of Parylene C Film to Aluminum Substrates
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用拉开法分析了KH550(γ-氨丙基三乙氧基硅烷)偶联剂浓度对Parylene C膜与金属铝基体间结合强度的影响,采用拉曼光谱(Raman)和红外光谱(FT-IR)分析了偶联剂在膜和基体间的作用机理。研究结果表明,使用10%的KH550偶联剂可提高Parylene C膜与铝基体的结合强度到7.5MPa。其增强作用机理为KH550偶联剂的烷氧基团水解后,-Si-OH与基体的Al-O键发生化学作用生成-Si-O-Al键,-NH2能与Parylene C膜分子间形成氢键,从而使Parylene C膜与金属铝之间产生化学键桥连。

    Abstract:

    Gama-amino-propyl-triethoxy-silane(named as KH550) was used as the surface treatment agent to improve the bonding strength of Poly(2-chloro-para-xylylene)(known as Parylene C) thin film to aluminium substrate.The effect on improving the bonding strength of Parylene C film to aluminium substrate surface was investigated.The mechanism was proposed by analyzing the chemical structures of the KH550 between aluminium substrate and Parylene C film.It is found that bonding strength of Parylene C film to the aluminium substrate is improved to 7.5MPa after surface treatment with 10% KH550 silane solution,due to the interaction of the silanol group with the aluminium oxide and the formation of the hydrogen bonds between-NH2 in KH550 and Cl-C-in Parylene C film.

    参考文献
    相似文献
    引证文献
引用本文

吉祥波,鲜晓斌,唐贤臣,帅茂兵.硅烷偶联剂KH550对Parylene C膜与金属铝基体结合强度的影响[J].高分子材料科学与工程,2012,28(3):57-59. Xiangbo Ji, Xiaobin Xian, Xianchen Tang, Maobing Shuai. Influence of KH550 Silane Coupling Agents on Adhesive Properties of Parylene C Film to Aluminum Substrates[J]. Polymer Materials Science & Engineering,2012,28(3):57-59.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司