原丝浸渍硼酸对炭纤维结构与性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ342.31

基金项目:

973项目“炭纤维高效快速制备新途径”(2011CB605603)


The Influence of Precursor of Boron Modification on the Structure and Properties of Carbon Fiber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    聚丙烯腈原丝(3K,1.1dtex)用硼酸进行浸渍,再分别进行间歇式预氧化和炭化。借助元素分析、X射线衍射、红外分析和扫描电镜等表征手段和力学性能测试,研究了硼酸浸渍对原丝结构、预氧化炭化过程及炭纤维结构与性能的影响。结果表明,硼能进入到原丝的内部,但只是物理吸附,在浸渍过程中不改变原丝结构,在预氧化过程,硼钝化了纤维的环化、氧化反应,起始温度推迟2.5℃。在炭化过程中,硼促进了纤维结构的有序化和完善,炭纤维的强度和模量都得到了提高。硼质量分数为1.376×10-4,张力为108 g时,炭纤维抗拉强度为2544 MPa,较同等条件未渗硼的提高约90%。

    Abstract:

    A polyacrylonitrile fiber(3K,1.1dtex) was dipped with boric acid,and then was oxidized and carbonized in batches.The influence of boric acid on the structure of the precursor,the process of oxidation and carbonization and the structure and performance of carbon fiber were studied on the characterizations of elemental analysis,X ray diffraction,infrared ray,differential scanning calorimetry,scanning electron microscope,as well as fiber density,diameter and tensile strength tests.The results show that boron can enter the interior of the precursor,but only is physically adsorbed without chemical reactions.Boron can deactivate the oxidation,making the initial temperature 2.5 ℃ higher.The strength and modulus of carbon fiber are increased significantly.During carbonization,the tensile strength of the carbon fiber is 2544 MPa with the boron mass fraction of 1.3762×10-4 and the stress of 108 g,90% higher than that of boron free samples.

    参考文献
    相似文献
    引证文献
引用本文

徐敏端,吕永根,郝宇晨,肖浩,宋燕.原丝浸渍硼酸对炭纤维结构与性能的影响[J].高分子材料科学与工程,2012,28(3):79-82. Minduan Xu, Yonggen Lv, Yuchen Hao, Hao Xiao, Yan Song. The Influence of Precursor of Boron Modification on the Structure and Properties of Carbon Fiber[J]. Polymer Materials Science & Engineering,2012,28(3):79-82.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司