高强度疏水缔合水凝胶的重塑性能机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O648.17

基金项目:

黑龙江省自然科学基金青年科学基金项目(QC08C33)


Remolding Mechanism of Hydrophobic Association Hydrogels with High Mechanical Strength
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将丙烯酰胺和少量的疏水单体辛基酚聚氧乙烯(4)醚丙烯酸酯溶解于十二烷基硫酸钠水溶液中,采用胶束共聚的方法成功制备了疏水缔合水凝胶(HA-gels)。HA-gels除具有良好的力学性能以外,还具有重塑性能。为了研究HA-gels的重塑性能,对其应力松弛行为进行了表征。研究结果表明,HA-gels应力松弛过程可以分为四个阶段:第一阶段是交联点间亲水长链的应力松弛过程;第二阶段是交联点间亲水长链已经高度取向;第三阶段是交联网络的结构重排过程;第四阶段是HA-gels的应力完全消除。因此,HA-gels内的交联点在外力的作用下可以解缔合和重新缔合来实现交联网络的结构重组,从而赋予了HA-gels的重塑性能。

    Abstract:

    Hydrophobic association hydrogels(HA-gels) were successfully prepared through micellar copolymerization of acrylamide and a small amount of octylphenol polyoxyethylene acrylate in an aqueous solution containing sodium dodecyl sulfate.HAgels exhibited excellent mechanical properties and remolding property.In order to study the remolding property,the stress-relaxation behavior of HA-gels was characterized.The result shows that the stress-relaxation behavior of HA-gels can be divided into four stages: stress relaxation of hydrophilic polymer chains between cross-linked points(Ⅰ);hydrophilic polymer chains between crosslinked points have a high level of orientation(Ⅱ);structural reorganization of the cross-linked network(Ⅲ);stress of HA-gels is gone entirely(Ⅳ).Therefore,for HA-gels,the capability of remolding results mainly from their unique network.Due to the network of HA-gels is a reversible three-dimensional physical cross-linked network,the structure rearrangement of cross-linked network can be achieved through dissociation and reassociation of cross-linking points under the condition of external forces.Therefore,this unique network endows remolding property of HA-gels.

    参考文献
    相似文献
    引证文献
引用本文

姜国庆,刘凤岐.高强度疏水缔合水凝胶的重塑性能机理[J].高分子材料科学与工程,2012,28(3):100-103. Guoqing Jiang, Fengqi Liu. Remolding Mechanism of Hydrophobic Association Hydrogels with High Mechanical Strength[J]. Polymer Materials Science & Engineering,2012,28(3):100-103.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司