可聚合表面活性剂在RAFT乳液聚合中的作用机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ316.334

基金项目:

国家自然科学基金资助项目(50773043)


Mechanism of the Polymerizable Surfactant in RAFT Emulsion Polymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以可聚合表面活性剂甲基丙烯酰氧乙基十二烷基二甲基溴化铵(C12N+)为乳化剂,羧端基十二烷基三硫代酯(DMP)为可逆加成-断裂链转移(RAFT)试剂,苯乙烯为单体,在不使用助稳剂条件下采用RAFT乳液聚合成功制备了聚苯乙烯纳米颗粒并对聚合机理及反应条件进行了初步研究。结果表明,C12N+乳化剂能在反应过程中参与单体共聚,形成的预聚物能起到助稳剂作用,反应温度以70℃为宜,产物平均粒径约为36nm,分子量分布小于1.5。

    Abstract:

    In this paper,a cationic polymerizable surfactant(methacryloxyethyl dodecydimethyl ammonium bromide,C12N+) was used to replace conventional emulsifiers in reversible addition fragmentation chain transfer(RAFT) emulsion polymerization of styrene.2 dodecylsulfanylthiocarbonyl-sulfanyl-2-methyl propionic acid(DMP) was used as a RAFT agent.Polymerization mechanism and reaction conditions had been studied.The results indicate that C12N+ can play the roles of an emulsifier and a costabilizer at the same time.The prepolymer of C12N+ can inhibit the migration of styrene in the polymerization process.Nanoscale latex particles with average diameter 36 nm were prepared at 70℃.The molecule weight of P(St-C12N+) is well controlled and the molecular weight distribution is less than 1.5.

    参考文献
    相似文献
    引证文献
引用本文

李言,曹亚.可聚合表面活性剂在RAFT乳液聚合中的作用机理[J].高分子材料科学与工程,2012,28(3):111-113,117. Yan Li, Ya Cao. Mechanism of the Polymerizable Surfactant in RAFT Emulsion Polymerization[J]. Polymer Materials Science & Engineering,2012,28(3):111-113,117.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司