聚硅氧烷-氢化双酚A环氧树脂的制备与表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.5

基金项目:

中央高校基本科研业务费专项资金资助(2010-ZY-CL-064)


Preparation and Characterization of Polysiloxane-Epoxy of Hydrogenated Bisphenol A
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用氢化双酚A环氧树脂和含有活性基团的聚硅氧烷制备聚硅氧烷-氢化双酚A环氧树脂(PSEHBA),通过差示扫描量热(DSC)分析、监测树脂黏度的变化和环氧值的变化等方法研究了适宜的反应温度、时间及催化剂用量。结果表明,制备PSEHBA适宜的反应温度为140℃,反应时间为3.5h,催化剂用量为m(催化剂)∶m(聚硅氧烷)=2∶100。红外光谱分析表明,所制备的PSEHBA是聚硅氧烷和氢化双酚A环氧树脂由化学键结合而成的产物,DSC分析显示PSEH-BA只有一个玻璃化转变区且其玻璃化温度比纯聚硅氧烷升高了32.1℃,贮存稳定性试验显示其具有良好的贮存稳定性。

    Abstract:

    Polysiloxane-epoxy of hydrogenated bisphenol A(PSEHBA) was synthesized through chemical reaction between epoxy of hydrogenated bisphenol A and polysiloxane with active groups.The reaction temperature,time and the content of catalyst were determined by differential scanning calorimetry(DSC) analysis,monitoring changes in resin viscosity and the epoxy value.The results indicates that the optimum reaction temperature is 140 ℃,reaction time is 3.5 h and the content of catalyst is m(DBTDL)∶m(DC-3074)=2∶100.Infrared spectroscopy(IR) shows that PSEHBA is obtained by the reaction of chemical bonds between polysiloxane and epoxy of hydrogenated bisphenol A.Differential scanning calorimetry(DSC) analysis displays that there is only one glass transition point in PSEHBA and the glass transition temperature of PSEHBA increases by 32.1 ℃ in comparison with pure polysiloxane.The storage stability test indicates that the prepared PSEHBA obtains good storage stability.

    参考文献
    相似文献
    引证文献
引用本文

潘钇安,余剑英,艾平松.聚硅氧烷-氢化双酚A环氧树脂的制备与表征[J].高分子材料科学与工程,2012,28(3):126-129. Yi’an Pan, Jianying Yu, Pingsong Ai. Preparation and Characterization of Polysiloxane-Epoxy of Hydrogenated Bisphenol A[J]. Polymer Materials Science & Engineering,2012,28(3):126-129.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司