Abstract:Electroless copper plating at the nickel modified surface of Kevlar fibers was investigated.The surface of Kevlar fibers was roughened using sodium hydride-dimethyl sulfoxide(NaH-DMSO).Then,influence of Ni weight gain rate and additives(polyethylene glycol PEG6000 and potassium ferrocyanide K4Fe(CN)6) on electroless Cu plating was studied.The results show that favorable Ni weight gain rate is approximate 10%,PEG6000 and K4Fe(CN)6 increase the stability of plating bath,and reduce the deposition rate of electroless Cu plating.Copper grains turn fine,sleek and homogeneous with adding PEG6000.Copper deposits become more compact,smoother and brighter with adding K4Fe(CN)6.Correspondingly,the appearance of deposits changes from dark-brown to red brown,and then to bright copper.Meanwhile,the conductivity of deposits increases.The properties tests show that breaking strength of Ni-Cu coated Kevlar fibers is 45N and the surface resistance is 0.4Ω/cm.