含苯乙烯VOCs废气排放控制治理案例分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

X783

基金项目:


A Case of Styrene Exhausts Treatment Process
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    介绍了高分子材料生产工厂含苯乙烯的挥发性有机化合物(VOCs)废气治理工程实例。生产废气通过集中收集,根据实际情况设计排风量,经过炭床分子过滤器处理后高空排放。废气处理系统的VOCs治理效率高达98.8%;气相色谱质谱联用仪检测发现废气中含量最高的物种为苯乙烯,达67.5%-77.2%,苯乙烯排放量远低于国家排放标准,VOCs减排效果好,环境效益明显。采用炭床分子过滤器对VOCs排放控制具有推广价值。

    Abstract:

    This paper described a case study of styrene exhausts treatment process from polymer production plant,in which exhausts volume is designed based on actual facts.Exhausts are centrally collected and then emit in high altitude after treatment by the carbon bed filter.Efficiency of volatile organic compounds(VOCs) treatment system is up to 98.8%.Styrene,which accounts for 67.5% to 77.2% of the total exhausts,is detected by gas chromatography mass spectrometer.Effect of VOCs reduction is obvious,and styrene emission is far below the national standard.In conclusion,carbon bed filter treatment,an environmentally friendly method of VOCs control,is worth promoting.

    参考文献
    相似文献
    引证文献
引用本文

曹聪,藤冈仁,佐藤一代,鲁君,阎建民.含苯乙烯VOCs废气排放控制治理案例分析[J].高分子材料科学与工程,2012,28(3):183-185,190. Cong Cao, Jin Fujioka, Ichiyo Sato, Jun Lu, Jianmin Yan. A Case of Styrene Exhausts Treatment Process[J]. Polymer Materials Science & Engineering,2012,28(3):183-185,190.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司