混沌混合及在聚合物共混中的应用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O631.3

基金项目:

浙江省自然科学基金资助项目(Y4090319);国家自然科学基金资助项目(50503020)


Chaotic Mixing and Its Application in Polymer Blending
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    传统聚合物共混过程由于强剪切作用而存在聚合物易降解和耗能高的缺点。采用混沌混合制备聚合物共混物,具有可调控相形态和混合效率高的优点。文中阐述了混沌混合的几何模型,介绍了现有混沌混合设备及其混合机理。混沌混合制备聚合物共混物过程中相态经历了从层状到纤维,最终到液滴状的逐步转变过程,因此可通过相形态的控制来高效制备增韧、多层抗渗透、纤维及导电等聚合物基复合材料。

    Abstract:

    The traditional polymer blend process has disadvantages of degradation and high energy consumption due to intense shear.Chaotic mixing can be used to produce polymer blends with the advantages of controllable morphology and high efficiency.The geometric model of chaotic mixing was illustrated along with corresponding equipments and mixing mechanisms.the morphology of polymer blends developed through a widely accepted route involving step by step transitions from lamellas to fibrils and to droplets.Therefore the chaotic mixing can be used to produce toughness enhanced,multilayer anti-infiltration,the fiber and conductive polymer-based composites by controlling the morphology of polymer blends.

    参考文献
    相似文献
    引证文献
引用本文

杨弋纬,王嘉骏,顾雪萍,冯连芳.混沌混合及在聚合物共混中的应用[J].高分子材料科学与工程,2012,28(3):186-190. Yiwei Yang, Jiajun Wang, Xueping Gu, Lianfang Feng. Chaotic Mixing and Its Application in Polymer Blending[J]. Polymer Materials Science & Engineering,2012,28(3):186-190.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司