粒料法合成高固含量聚氨酯分散体胶粘剂
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ433.432

基金项目:

广东省省部产学研项目(2010B090400080);广东省科技攻关项目(2010B010800016)


Synthesis of High Solid Content Polyurethane Dispersion Adhesive by Pellet Process
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚己二酸1,4-丁二醇酯(PBA-3000)为软段、异佛尔酮二异氰酸酯(IPDI)、1,4-丁二醇(BG)为硬段、聚醚二元醇磺酸盐(SPPG)作为亲水单体,采用本体聚合方法合成了聚氨酯离子聚合物。聚氨酯离子聚合物经造粒、丙酮溶解、水分散、去丙酮得到固含量为50%的高固含量聚氨酯分散体胶粘剂。研究了硬段含量、分子量对分散体平均粒径和粒径分布、胶膜的热学性能以及粘合性能的影响。聚氨酯分散体胶粘剂的最高初粘力为6N/mm,最高剥离强度为10.24 N/mm。

    Abstract:

    Polyurethane inomer was prepared by isophorone diisocyanate(IPDI) and 1,4-butanediol(BG)as hard segments,poly(1,4-butylene adipate glycol)(PBA) with an average molecular weight of 3000 as soft segments,polyether diol containing sulfonate(SPPG) as hydrophilic monomer in soft segment,and dibutyltin dilaurate(DBTDL) as catalysts through bulk polymerization.Polyurethane dispersions(PUDs) adhesive with a solid content of 50% was synthesized by granulation,dissolution in acetone,dispersion in water,distillation of acetone of polymerization.The effect of hard segment content and molecular weight on mean particle size and particle distribution,thermodynamics performance of cast films,and adhesive performance was researched in this paper.The results show that the maximum I-Peel strength and T-Peel strength is 6N/mm and 10.24 N/mm,respectively and the cast films has good heat resitence.

    参考文献
    相似文献
    引证文献
引用本文

贺丽娜,孙东成.粒料法合成高固含量聚氨酯分散体胶粘剂[J].高分子材料科学与工程,2012,28(4):1-4. Lina He, Dongcheng Sun. Synthesis of High Solid Content Polyurethane Dispersion Adhesive by Pellet Process[J]. Polymer Materials Science & Engineering,2012,28(4):1-4.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司