高邻位热塑性酚醛树脂的合成及固化性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.1

基金项目:

陕西省13115科技创新重大科技专项(2010ZDKG-36)


Synthesis and Curing Performance of the HighOrtho Thermoplastic Phenolic Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在常压条件下,合成了高邻位热塑性酚醛树脂,并考察了反应过程中催化剂种类、反应原料配比等因素对树脂性能的影响。通过软化点测试仪、核磁共振谱仪和热分析(TG-DSC)等研究了树脂合成过程中各制备参数对树脂结构和固化性能影响。结果表明:选择醋酸锌做邻位加成的第一催化剂,有机酸草酸做缩聚反应的第二催化剂,m(P)/m(F)比为1:0.7时合成酚醛树脂的O/P值较高,凝胶时间较短,固化反应更易进行。

    Abstract:

    The high-ortho thermoplastic phenolic resin was synthesized by using formaldehyde and excessive phenol as reactants under normal pressure condition.The influences of various parameters such as the ratio of raw materials,the sort of the catalysts on the properties of the resultant phenolic resin were investigated.Various methods such as the soften point measurements,nuclear magnetic resonance spectroscopy(NMR),differential scanning calorimetry-thermogravimetric(DSC-TG) analysis were used to characterize the structure and curing performance of the resin.The results show that when m(P)/m(F) ratio is 1∶0.7,using zinc acetate as the first catalyst,and acetic acid as the second polycondensation catalyst,the phenolic resin with higher O/P value can be synthesize.The resultant resin has the short gel time.

    参考文献
    相似文献
    引证文献
引用本文

殷勇刚,任蕊,刘春玲,董文生.高邻位热塑性酚醛树脂的合成及固化性能[J].高分子材料科学与工程,2012,28(4):9-13. Yonggang Yin, Rui Ren, Chunling Liu, Wensheng Dong. Synthesis and Curing Performance of the HighOrtho Thermoplastic Phenolic Resin[J]. Polymer Materials Science & Engineering,2012,28(4):9-13.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司