乙酰丙酮盐催化碳酸乙烯酯和丁二酸二甲酯的耦合反应
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.41

基金项目:

国家科技支撑计划(2011BAZ03281)


Coupling Reaction of Ethylene Carbonate and Dimethyl Succinate by Using Metal Acetylacetone as Catalysts
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    研究了乙酰丙酮盐催化碳酸乙烯酯(EC)和丁二酸二甲酯(DS)耦合反应合成聚丁二酸乙二酯(PES)预聚体和碳酸二甲酯(DMC)的新工艺。结果表明,乙酰丙酮氧钛对EC和DS耦合反应的催化效果最好。并以乙酰丙酮氧钛为催化剂考察了反应温度、催化剂用量、物料配比、反应时间对耦合反应的影响,得到最佳的工艺条件:反应温度225℃~235℃,n(EC)=0.23 mol,n(DS)=0.1 mol,n(cat)=3.3mol,反应时间3h。在该工艺条件下,DMC收率51.3%,PES预聚体的特性黏数0.1358。

    Abstract:

    A technology of simultaneous synthesis of poly(ethylene succinate) oligomers and dimethyl carbonate was obtained by coupling reaction of ethylene carbonate and dimethyl succinate through various metal acetylacetone catalysts.The results show that the titanium(IV) oxide acetylacetonate catalyst exhibits the highest activity in this coupling reaction.Under this catalyst,the effects of material ratio,reaction temperature,reaction time,the amount of titanium(IV) oxide acetylacetonate catalyst on the coupling reaction of ethylene carbonate and dimethyl succinate were investigated.The preferable reaction conditions were as followed: the reaction temperature 225 ℃~235 ℃,the molar of dimethyl succinate 0.1 mol,the molar ethylene carbonate of 0.23 mol,and the titanium(IV) oxide acetylacetonate catalyst 3.3 mmol,reaction time 3h.Under the selected reaction conditions,the yield of dimethyl carbonate is 51.3%,intrinsic viscosity of polyethylene succinate is 0.1358 dL/g.

    参考文献
    相似文献
    引证文献
引用本文

马楷,张廷建,刘绍英,王公应.乙酰丙酮盐催化碳酸乙烯酯和丁二酸二甲酯的耦合反应[J].高分子材料科学与工程,2012,28(4):14-17. Kai Ma, Tingjian Zhang, Shaoying Liu, Gongying Wang. Coupling Reaction of Ethylene Carbonate and Dimethyl Succinate by Using Metal Acetylacetone as Catalysts[J]. Polymer Materials Science & Engineering,2012,28(4):14-17.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司