织物涂层用含氟硅油改性聚氨酯水分散体的合成与表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.8

基金项目:


Synthesis and Characterization of Waterborne Polyurethane Modified by Fluorinated Polysiloxane Used for Fabric Coating
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为合成高性能织物涂层剂,以聚四氢呋喃醚、聚乙二醇、端氨基含氟硅油为混合软段,合成了有机硅改性的水性聚氨酯(WFSPU)。用红外光谱、核磁共振谱表征了改性聚氨酯的化学组成;通过纳米粒度测定及Zeta电位分析考察了乳液的稳定性;通过差热扫描量热、正电子湮灭谱及静态拉伸试验分别研究了WFSPU膜的热性能、自由体积空洞及力学性能。研究结果表明,当含氟硅油用量(质量分数)<10%时,可以制得稳定的乳液,聚氨酯膜的软段玻璃化转变温度约为-78℃。当含氟硅油质量分数为6%时,WFSPU膜的拉伸模量最高,达到47.33 MPa,断裂伸长率为663.49%。

    Abstract:

    For the synthesis of high-performance fabric coating agents,water-borne polyurethanes modified by polysiloxane(WFSPU) were prepared by polyaddition reaction using poly(tetramethylene oxide)glycol,polyethylene glycol and amino fluorinated polysiloxane(AFS) as mixing soft segments.The chemical composition of modified polyurethane was characterized using infrared spectroscopy and nuclear magnetic resonance spectroscopy.The emulsion stability was studied by the use of nano-particle size and Zeta potential analyzer.Thermal properties,free volume hole and mechanical properties of WFSPU film were investigated by differential scanning calorimetry,positron annihilation spectroscopy and static tensile test.The results show that stable emulsion can be obtained when the amount of AFS(mass fraction) <10%.Soft segment glass transition temperature of polyurethane film is about-78 ℃.When the mass fraction of AFS is 6%,the tensile modulus of polyurethane films is up to 47.33MPa,while the break elongation is 663.49%.

    参考文献
    相似文献
    引证文献
引用本文

雷海波,罗运军,李晓萌,王胜鹏,李卓新,王宝义.织物涂层用含氟硅油改性聚氨酯水分散体的合成与表征[J].高分子材料科学与工程,2012,28(4):26-30. Haibo Lei, Yunjun Luo, Xiaomeng Li, Shengpeng Wang, Zhuoxin Li, Baoyi Wang. Synthesis and Characterization of Waterborne Polyurethane Modified by Fluorinated Polysiloxane Used for Fabric Coating[J]. Polymer Materials Science & Engineering,2012,28(4):26-30.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司