高固体含量线性酚醛树脂的固化动力学
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.1

基金项目:


Curing Kinetics of Novolac-Type Phenolic Resin with High Solid Content
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    合成了高固体含量(>85%)的线性酚醛树脂,经凝胶渗透色谱/多角度激光光散射(SEC/MALLS)联用仪测定其数均分子量为1577,且分子量分布范围较窄,-Mw/-Mn仅为1.127。采用差示扫描量热(DSC)分析技术在50℃~300℃温度范围内,以不同的升温速率(2.5℃/min、5℃/min、7.5℃/min和10℃/min)研究了该酚醛树脂的固化反应过程。结果表明,该高固体含量线性酚醛树脂的凝胶化温度Tgel=110.61℃,固化温度Tcure=129.14℃,后处理温度Ttreat=146.96℃;根据Kissinger方程、Ozawa方程和Crane方程以及n级动力学模型确定该树脂的固化动力学方程为dα(t)/dt=2.09×1017(1-α)0.95exp(-2.10235×104/T)。

    Abstract:

    Novolac-type resin with high solid content(>85%) was synthesized,of which number average molecular weight is 1577 and distribution is narrow.The curing process was studied by differential scanning calorimetry(DSC) at different heating rates of 2.5 ℃/min,5 ℃/min,7.5 and 10 ℃/min between 50 ℃~300 ℃.The gelation temperature,curing temperature and post processing temperature of the resin are 136.68 ℃,163.16 ℃ and 197.39 ℃ respectively.According to Kissinger equation,Ozawa equation,Crane equation and the n-level kinetic model,the curing kinetic equation is dα(t)/dt=2.09×1017(1-α)0.95exp(-210235×103/T).

    参考文献
    相似文献
    引证文献
引用本文

理莎莎,齐暑华,刘乃亮,曹鹏.高固体含量线性酚醛树脂的固化动力学[J].高分子材料科学与工程,2012,28(4):51-54. Shasha Li, Shuhua Qi, Nailiang Liu, Peng Cao. Curing Kinetics of Novolac-Type Phenolic Resin with High Solid Content[J]. Polymer Materials Science & Engineering,2012,28(4):51-54.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司