DPSBCB单体的合成表征及聚合物的热性能和成膜性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ320.1

基金项目:

国家高技术863基金(2009AA8-441011);中国工程物理研究院科学技术发展基金(2008A0302014)


Synthesis of DPSBCB and Thermostability and Film-Forming Property of Its Polymers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以4-溴苯并环丁烯(4-BrBCB)和烯丙基溴(ABr)为原料,利用Grignard反应一步法合成出4-烯丙基苯并环丁烯(4-ABCB)单体,并通过硅氢加成反应,成功地将硅氧烷引入到BCB单体中,合成出1,3-二(3-苯并环丁烯基丙基)-1,1,3,3-四甲基二硅氧烷(DPSBCB)单体。单体结构利用红外光谱(FT-IR)、核磁共振(1H-NMR、13C-NMR)等进行了表征和确认。DPSBCB单体在热引发条件下开环聚合得到具有一定交联度的可溶性预聚体。最后利用旋涂法制备出聚合物薄膜,分析了聚合物的成膜性能和热性能,结果显示,薄膜的均方根粗糙度(RMS)为0.79 nm,聚合物初始分解温度为445℃。说明DPSBCB聚合物具有良好的成膜性能和优异的热稳定性。

    Abstract:

    4-bromobenzocyclobutene and allyl bromide were employed to afford the monomer of 4-allylbenzocyclobutene by Grignard reaction in one-step.The siloxane was introduced into the monomer of BCB to preparation 1,3-bis(3-benzocyclobutenyl propyl)-1,1,3,3-tetramethyl disiloxane(DPSBCB) via hydrosilylation reaction.The structures of the monomers were characterized and confirmed by Fourier transform infrared spectrum(FT-IR),nuclear magnetic resonance spectrum(1H-NMR and 13C-NMR).The prepolymerization reaction of DPSBCB was carried out by thermal initiation to give the soluble prepolymer with some crosslink degree.The thermostability and film-forming property of the film prepared from the prepolymer by spin-coating method were analyzed by thermogravimetry and atomic force microscopy.The results show that the root-mean square(RMS) roughness is 0.79 nm,and the starting mass loss temperature is about 445 ℃.It indicate that DPSBCB exhibits good film-forming property and excellent thermal stability.

    参考文献
    相似文献
    引证文献
引用本文

黄学亮,朱方华,杨军校,张林,谢如刚. DPSBCB单体的合成表征及聚合物的热性能和成膜性能[J].高分子材料科学与工程,2012,28(4):55-58. Xueliang Huang, Fanghua Zhu, Junxiao Yang, Lin Zhang, Rugang Xie. Synthesis of DPSBCB and Thermostability and Film-Forming Property of Its Polymers[J]. Polymer Materials Science & Engineering,2012,28(4):55-58.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司