POE-g-MAH对尼龙6的增韧改性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.6

基金项目:


Structure and Mechanical Properties of Nylon6 Toughened by POE-g-MAH
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用马来酸酐接枝乙烯-辛烯共聚物(POE-g-MAH)对两种尼龙6树脂增韧改性,制备了不同增韧剂含量的增韧尼龙6材料。通过力学性能测试和SEM研究了增韧剂质量分数对其力学性能的影响,观察了POE-g-MAH/尼龙6复合材料冲击断面形貌。结果表明,随着增韧剂含量的增加,尼龙6的韧性显著提高,强度下降;且随着增韧剂的增多,在尼龙基体中形成有效的增韧剂聚集相起到改善韧性的作用;在两种流动性差异较大的尼龙6基体中,POE-g-MAH均表现优异的增韧效果。

    Abstract:

    Toughened nylon-6 composites with different contents of toughening agent were prepared with maleic anhydride grafting ethylene-octene copolymer(POE-g-MAH) as toughening agent.The mechanical properties of toughened nylon-6 and fracture morphology of impact sample were researched by mechanical test and scanning electron microscope(SEM).The results show that as the content of POE-g-MAH increases,the impact strength of PA6/POE-g-MAH increases significantly,but the tensile and flexural strength decrease;and the effective POE-g-MAH phase was observed which improved the toughness of nylon-6.Further,POE-g-MAH can toughen effectively different nylon-6 materials and the melt flow-ability of nylon-6 matrix hasn’t clearly influent the toughening process of POE-g-MAH.

    参考文献
    相似文献
    引证文献
引用本文

王萍丽,孔壮志,季君晖. POE-g-MAH对尼龙6的增韧改性[J].高分子材料科学与工程,2012,28(4):73-75,80. Pingli Wang, Zhuangzhi Kong, Junhui Ji. Structure and Mechanical Properties of Nylon6 Toughened by POE-g-MAH[J]. Polymer Materials Science & Engineering,2012,28(4):73-75,80.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司