多交联型聚氨酯材料的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ323.8

基金项目:


Preparation and Properties of PU with Different Crosslink Density Micro-Domains
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚酯多元醇(PEA)、2,4-甲苯二异氰酸酯(TDI-100)为原料,采用预聚法制备预聚体,将预聚体分成两部分分别以不同的扩链系数与扩链剂3,5-二甲硫基甲苯二胺(E-300)混合反应,再将两种配料不同的预反应物混合后浇铸成型,即为多交联体系聚氨酯材料。利用差示扫描量热(DSC)、耐溶剂性和力学测试考察其性能并与均一体系聚氨酯(PU)材料的性能进行比较。力学性能测试表明,多交联体系聚氨酯材料的耐撕裂性能明显提高,拉伸性能略微降低;多交联体系聚氨酯材料的耐溶剂性能也明显提高;DSC测定结果表明,多交联体系材料的微相分离更好。

    Abstract:

    The pre-polymers were prepared from polyethylene glycol adipate(PEA),toluene 2,4-diisocyanate(TDI-100) by a pre-polymerization method,after chain extended by 3,5-dimethyl mercapto toluenediamine(E-300),polyurethane(PU)with different crosslink density micro-domains was obtained with different chain extension methods.The properties of PU were characterized by differential scanning calorimetry(DSC),solvent resistance and mechanical properties testing.It is demonstrated that PU with different crosslink density micro-domains has optimal tear resistance and good tensile strength.DSC results suggeste a better micro-phase separation of soft segment and hard segment in PU with different crosslink density micro-domains.Besides,PU has excellent solvent resistance performance.

    参考文献
    相似文献
    引证文献
引用本文

杨茹果,李小宁,吕志平,杨云飞.多交联型聚氨酯材料的制备与性能[J].高分子材料科学与工程,2012,28(4):129-132. Ruguo Yang, Xiaoning Li, Zhiping Lv, Yunfei Yang. Preparation and Properties of PU with Different Crosslink Density Micro-Domains[J]. Polymer Materials Science & Engineering,2012,28(4):129-132.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司