高导热环氧/有机硅杂化封装胶的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ436.6

基金项目:

上海市科委纳米技术专项基金(1052nm07400);上海市重点学科建设项目(S30107);上海大学研究生创新基金(SHUCX102263)


Synthesis and Propertics of High Thermal Conductivity Epoxy/Organic Hybrid Packaging Adhesive
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以γ-缩水甘油醚氧丙基三甲氧基硅烷为原料,通过水解缩聚制备出有机硅树脂,采用不同尺寸的改性氧化铝填充环氧/有机硅树脂基体以改善其耐热性能,并考察其力学性能、导热性能。结果表明,合成的有机硅树脂能提高封装胶的热分解温度,其热分解温度比环氧树脂高35.66℃。所制备封装胶的导热系数为1.01 W/(m.K),相比单一环氧树脂其导热性能提高了约5倍,其粘接强度为10.27 MPa,该导热封装胶表现出良好的的综合性能,可用于微电子器件封装领域。

    Abstract:

    The organosilicon resin was synthesized from γ-(glycidoxypropyl)trimethoxysilane through the hydrolytic polycondensation.Various sizes of alumina were filled in the epoxy/organic hybrid resin.The thermal conductivity and mechanical property of thermal adhesive were analyzed.It is found that heat resisting property can be raised by organosilicon resin of which thermal decomposition temperature is increased by 35.66 ℃ compared to that of cured product of epoxy resin,the thermal conductivity of packaging adhesive is 1.01 W/(m·K) and increaseas by five times,the adhesive strength is 10.27 MPa,It can be concluded that this adhesive has better combination properties.This high thermal conductivity epoxy/organic hybrid packaging adhesive can be widely used in microelectronics devices.

    参考文献
    相似文献
    引证文献
引用本文

裴昌龙,贺英,张瑶斐,朱棣,陈杰,王均安.高导热环氧/有机硅杂化封装胶的制备与性能[J].高分子材料科学与工程,2012,28(4):140-143. Synthesis and Propertics of High Thermal Conductivity Epoxy/Organic Hybrid Packaging Adhesive[J]. Polymer Materials Science & Engineering,2012,28(4):140-143.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司