RAFT与点击化学结合制备UV固化丙烯酸树脂
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O631.3

基金项目:

国家自然科学基金资助项目(51063002);江西省自然科学基金资助项目(2009GZH0035)


Synthesis of UV-Curing Acrylic Resin by the Combination of RAFT and Click Chemistry
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以3-(苄硫基硫代羰基硫基)丙酸(BCTPA)为链转移剂,过硫酸铵(APS)/NaHSO3为氧化还原引发剂,用可逆加成-断裂链转移(RAFT)活性自由基乳液聚合制备了窄分布(PDI=1.21)的聚甲基丙烯酸烯丙酯(PAMA),并用核磁共振(1H-NMR)和凝胶渗透色谱(GPC)对其进行了表征,GPC测得PAMA数均分子量为7463,与通过单体转化率计算的理论分子量7483及氢谱计算分子量9358结果基本一致。采用巯基-烯烃点击反应对PAMA进行UV固化交联,固化后涂膜硬度由1H变为2H;耐水性测试表明,固化前40 min即发白,固化后24 h内仍未发白。PAMA固化前后的IR对照结果表明,固化后乙烯基信号3088 cm-1峰消失,表明烯丙基参与了固化交联反应。

    Abstract:

    Poly(allyl methacrylate)(PAMA) with narrow molecular weight distribution(PDI=1.21) was synthesized by radical addition-fragmen-tation chain transfer(RAFT) emulsion polymerization,using 3-(benzylthiocarbonothioylthio)propanoic acid(BCTPA) as chain transfer agent and ammonium persulfate(APS)/NaHSO3 as redox initiator.The PAMA was characterized by 1H-NMR and gel permeation chromatograph(GPC).The number-average molecular weight of PAMA from GPC is 7463,which is consistent with that from 1H-NMR spectrum(9358) and monomer conversion(7483).Then the PAMA was UV-cured with 1,2-ethanedithiol by thiol-ene click reaction.After that,the hardness of the film is increases from 1H to 2H,and the film doesn’t turn white within 24 h in water.Compared with the IR spectra of pre-UV cured PAMA,disappearance of the peak at 3088 cm-1 of postUV cured PAMA indicates that the allylic groups undergo crosslinking reaction.

    参考文献
    相似文献
    引证文献
引用本文

刘忠彬,程传杰,郑义,申亮,乔永洛,付长清. RAFT与点击化学结合制备UV固化丙烯酸树脂[J].高分子材料科学与工程,2012,28(4):156-159. Zhongbin Liu, Chuanjie Cheng, Yi Zheng, Liang Shen, Yongluo Qiao, Changqing Fu. Synthesis of UV-Curing Acrylic Resin by the Combination of RAFT and Click Chemistry[J]. Polymer Materials Science & Engineering,2012,28(4):156-159.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司