基于应变能模型的电活性弹胶物平面机电驱动特性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TB303

基金项目:

广东省科技计划项目(2004B10201036)


Electroactive Dielectric Elastomer Planar Actuation Modeling Based on Strain-Energy Functions
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用前期工作由单轴拉伸实验获取并验证的材料常数,进一步研究Mooney-Rivlin、Ogden和Yeoh三种应变能模型在绝缘弹胶物(DE)材料的平面机电响应建模。根据实际试验中的平面双向预拉伸、两面加电场的边界条件,确定机电驱动模型,根据在一系列预拉伸值下进行的系列平面机电驱动试验,研究材料常数的合理性和机电驱动模型的可行性。研究结果表明,4参数、6参数的Ogden模型及Yeoh模型均可反映DE材料的机电响应特性;模型参数合理可行;Mooney-Rivlin模型不适合DE材料的机电驱动。

    Abstract:

    This paper applied the material parameters obtained and evaluated from uniaxial extension test regression and fitting in our previous work to further study dielectric elastomer(DE) planar actuation modeling based on strain energy functions. Actuation experiments with a few prestretch values are performed and are presented coMPared with the Ogden,Mooney-Rivlin and Yeoh actuation models.The result shows that the material constants are reasonable and the Ogden models with N=2 and N=3 and Yeoh model are good and applicable to the DE actuation,but Mooney-Rivlin model does not fit.Future work will be focus on the application of the Ogden and Yeoh models in the actuator device.

    参考文献
    相似文献
    引证文献
引用本文

祁新梅,宗志坚,郑寿森.基于应变能模型的电活性弹胶物平面机电驱动特性[J].高分子材料科学与工程,2012,28(4):164-168. Xinmei Qi, Zhijian Zong, Shousen Zheng. Electroactive Dielectric Elastomer Planar Actuation Modeling Based on Strain-Energy Functions[J]. Polymer Materials Science & Engineering,2012,28(4):164-168.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司