含联苯基和亚胺基热致性聚酯液晶的合成与表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O631.3

基金项目:

广西自科科学基金资助项目(0991003Z,0842003-4A);广西科技攻关项目(0992022-4);广西高校优秀人才资助计划(08817)


The Synthesis and Characterization of Liquid Crystalline Polyester Containing Biphenylnate and Imide Units
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以N,N′-二(ω-羟乙基)苯均四甲酰二亚胺(BHDI)、对苯二甲酰氯(TPC)、4,4′-二(β-羟己氧基)联苯(BP6)为单体,通过改变BHDI和BP6的物质的量比,制备了三种主链上同时含有联苯基和亚胺基的聚酯液晶(PBHT)。采用傅里叶红外光谱(FT-IR)、差示扫描量热分析仪(DSC)、偏光显微镜(POM)、广角X射线衍射(WAXD)及热重分析(TGA)等手段对聚合物结构及性能进行表征。结果表明,当BP6和BHDI物质的量比为4∶3时,聚酯液晶(PBHT)的液晶区间最宽,为116℃-190℃;该类液晶在液晶态温度区间呈现出向列型液晶丝状织构,WAXD分析显示为半结晶性聚合物;随着BHDI含量的增大,液晶聚酯热性能有所提高。

    Abstract:

    Three kinds of liquid crystalline polyester(PBHT) containing biphenylnate and imide units were synthesized by polyaddition reaction of 4,4′-bis-(6-hydroxyhexoxy)biphenyl(BP6) with terephthaloy chloride(TPC) and N,N′-bis(2-hydroxyhexyl)–dicarboxyimide(BHDI) through changing the molar ratio of BP6 and BHDI.PBHTs were characteristied by using infrared spectroscopy(FT-IR),differential scanning calorimetry(DSC),polarized light microscopy(POM),X-ray diffraction(WAXD) and thermogravimetric analyse(TGA).The results show that the type of PBHT has the most extensive liquid crystalline range for the 116 ℃-190 ℃,when molar ratio of BP6 and BHDI is 4∶3.All of the liquid crystalline polyester exhibit thermotropic nematic liquid crystalline textures at the liquid crystalline temperature range.WAXD analysis shows that PBHTs is the semi-crystalline polymers.The TGA observation confirms that the thermal performance of PBHT can be improved much by adding imide units.

    参考文献
    相似文献
    引证文献
引用本文

刘括,陆绍荣,黄志义,郭栋,罗崇禧.含联苯基和亚胺基热致性聚酯液晶的合成与表征[J].高分子材料科学与工程,2012,28(5):16-19. Kuo Liu, Shaorong Lu, Zhiyi Huang, Dong Guo, Chongxi Luo. The Synthesis and Characterization of Liquid Crystalline Polyester Containing Biphenylnate and Imide Units[J]. Polymer Materials Science & Engineering,2012,28(5):16-19.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司