紫外光直接引发AM反相微乳液聚合及其机理
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ316.334

基金项目:


Polymerization of AM Inverse Microemulsion Initiated Directly by UV Radiation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将直接光引发的低温、高纯度特性和微乳液聚合的低黏度、快速反应相结合,研究了丙烯酰胺、乳化剂、水和环己烷体系的微乳液聚合。在低温下(24℃-30℃)且不使用引发剂,采用紫外光直接引发了聚合反应并得到纳米微胶乳。通过研究反相微乳液聚合,得到光强IUV、单体浓度[M]、乳化剂浓度[E]、温度T对聚合反应的影响规律,聚合速率Rp随IUV、[M]和T的增大而变快,随[E]的增加变慢;产物特性粘数[η]随[M]的增加变大,随IUV、[E]和T的增大变小。并得到动力学方程式:Rp∝[IUV]0.4972[M]1.5048[E]-0.5731及表观活化能Ea=12.98kJ/mol。根据得到的动力学数据和实验结果探讨了聚合反应机理。

    Abstract:

    By combining the microemulsion polymerization with UV direct initiation,an efficient method for polymerization of AM with high polymerization rate and purity of product,low polymerization temperature and viscosity was developed.In the absence of initiator and under UV radiation,the polymerizations of AM inverse microemulsion system were successfully accomplished at low temperature(24 ℃-30 ℃) and PAM microlatex was obtained.The effects of UV intensity,monomer concentration,emulsifier concentration and temperature on polymerization rate and intrinsic viscosity of polymer were researched.Rp decreased with [E] and increased with IUV,[M] and T.[η] increased with [M] and decreased with IUV,[E] and T.The apparent activation energy of the reaction and polymerization kinetics of Rp was obtained as the following: Ea=12.98 kJ/mol,Rp∝0.4972[M]1.5048[E]-0.5731.Based on the abundant experimental results,the reasonable polymerization mechanisms were proposed.

    参考文献
    相似文献
    引证文献
引用本文

谢龙,邵自强.紫外光直接引发AM反相微乳液聚合及其机理[J].高分子材料科学与工程,2012,28(5):41-43,48. Long Xie, Ziqiang Shao. Polymerization of AM Inverse Microemulsion Initiated Directly by UV Radiation[J]. Polymer Materials Science & Engineering,2012,28(5):41-43,48.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司