无规聚苯基硅倍半氧烷阻燃聚碳酸酯的性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TQ324.21

基金项目:

国家高技术研究发展计划(863计划)资助项目(2007AA03Z538)


Flame Retardant Properties of Polycarbonate/ Irregular Polyphenylsilsesquioxane Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用笔者自制的无规聚苯基硅倍半氧烷(IPPS)与聚碳酸酯(PC)通过双螺杆挤出机熔融共混,制得不同含量IPPS的PC/IPPS复合物。利用极限氧指数(LOI),垂直燃烧等级(UL-94)和锥形量热仪对PC/IPPS复合物的燃烧性能进行了表征;通过拉伸强度、弯曲强度及弯曲模量对PC/IPPS复合物的力学性能进行了表征;通过热失重分析了IPPS对PC热性能的影响。实验表明,当添加质量分数8%的IPPS时,可以使PC的极限氧指数(LOI)从26%提高到35.5%,UL-94(1.6mm)燃烧级别从无级别提高到V-0;热释放速率峰值(PHRR)从570.8 kW/m2降到267.3 kW/m2。燃烧后的炭层表面被白色的二氧化硅覆盖,很好地阻隔辐射热和氧向基材的传递。IPPS使得PC的力学性能有轻微的下降,不改变PC的降解路径。

    Abstract:

    Irregular polyphenylsilsesquioxane(IPPS) was independently synthesized in our laboratory.IPPS mixed with polycarbonate(PC) by the twin-screw extruder to prepare PC/IPPS composites.The flammability of the PC/IPPS composites was characterized by limiting oxygen index(LOI),UL 94 burning rating and Cone calorimeter test.The mechanical properties of PC/IPPS composites,such as tensile strength,flexural strength and modulus,were tested.The thermal properties were analyzed through the thermal gravimetric analysis(TGA).The results show that the LOI value of PC/8% IPPS composite can achieve 35.5% comparing with 26% of pure PC,and UL94(1.6mm) can reach V-0 rating.The peak heat release rate(PHRR) decreases from 570.8 kW/m2 to 267.3 kW/m2 in the 8% IPPS loading.The surface of char residues is covered by white silica,which can prevent transfer of the heat and oxygen to PC matrix.The mechanical properties of PC with IPPS loading has a slightly decrease.However,the addition IPPS has no effect on the thermal degradation path of PC matrix.

    参考文献
    相似文献
    引证文献
引用本文

李腊梅,李向梅,杨荣杰.无规聚苯基硅倍半氧烷阻燃聚碳酸酯的性能[J].高分子材料科学与工程,2012,28(5):65-68. Lamei Li, Xiangmei Li, Rongjie Yang. Flame Retardant Properties of Polycarbonate/ Irregular Polyphenylsilsesquioxane Composites[J]. Polymer Materials Science & Engineering,2012,28(5):65-68.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-04-16
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司